- Faraday's laws — quantitative electrolysis
- Standard electrode potentials · coming soon
- Electrolysis — quantitative and selective discharge · coming soon
A solution is never just the compound
The electrolysis lecture left two puzzles. When a key was copper-plated in copper(II) sulfate solution, copper formed on the key. Why copper, and not hydrogen from the water? And when Humphry Davy passed a current through a solution of potassium hydroxide in 1807, he got no potassium at all. Only when he melted the compound did the metal appear.
Both puzzles have the same cause. A molten compound contains only its own ions, so there is no choice: the cation goes to the cathode and the anion to the anode. A solution also contains water, and water can take electrons and give them up too. So at each electrode there is a competition. This lecture shows how to predict the winner, with a reason for each rule.
Who competes at each electrode
List the particles near each electrode. In copper(II) sulfate solution, there are Cu²⁺ ions, SO₄²⁻ ions and water molecules.
At the cathode, two kinds of particle could take electrons. Cu²⁺ could be reduced to copper. Or water could be reduced to hydrogen:
At the anode, two kinds of particle could give up electrons. SO₄²⁻ could be oxidised. Or water could be oxidised to oxygen:
Check both with the habits of the balancing lecture. In the first, H, O and charge balance: 4 H, 2 O and a charge of −2 on each side. In the second: 4 H, 2 O, and a charge of 0 on each side. Water can do both jobs. The question is always whether water or the dissolved ion does it more readily.
The cathode: who takes electrons more readily?
The reactivity series lists metals by how readily they give up electrons. Potassium and sodium give theirs up very easily, which is why they react so violently. Copper and silver hold on to theirs. Now turn this round. A metal that gives up electrons easily forms an ion that takes them back very reluctantly. A metal that holds on to its electrons forms an ion that takes them back readily.
So at the cathode, compare the metal with hydrogen, which sits in the reactivity series between lead and copper. If the metal is less reactive than hydrogen, like copper or silver, its ions take electrons more readily than water does, and the metal deposits. If the metal is very reactive, like potassium, sodium, calcium, magnesium or aluminium, water wins, and hydrogen is given off. The metal ions stay in the solution. That is why Davy's potassium solution gave hydrogen, and why the key got copper.
One honest caution. For metals in the middle of the series, the result depends on the conditions, and books differ. Zinc is more reactive than hydrogen, yet most of the world's zinc is made by electrolysing zinc sulfate solution, because hydrogen forms only slowly on a zinc surface (sources: Guerra, University of British Columbia, 2003; US Bureau of Mines Report of Investigations, 1979). The Pre-University lectures explain this with electrode potentials. At this level, use the rule for metals that are clearly above or below hydrogen.
The anode: who gives up electrons more readily?
At an inert anode, the anion competes with water. Sulfate (SO₄²⁻) and nitrate (NO₃⁻) hold their electrons very tightly. They are never oxidised in solution, so water gives up electrons instead, and oxygen is given off.
The halide ions, chloride (Cl⁻), bromide (Br⁻) and iodide (I⁻), are different. They give up electrons about as readily as water does, so concentration decides. In a concentrated solution, there are so many halide ions at the anode that the halogen forms: chlorine, bromine or iodine. In a dilute solution, water wins, and the product is mainly oxygen.
There is one more possibility. If the anode is not inert but made of a metal such as copper, the anode itself can give up electrons more readily than anything in the solution. Then the anode dissolves, and no gas forms at all. This is what happened to the copper block in the plating lecture.
Cathode: a metal less reactive than hydrogen is deposited. For a very reactive metal, hydrogen forms instead.
Inert anode: a concentrated halide gives the halogen. Sulfate, nitrate, or a dilute halide gives oxygen.
Active anode (such as copper): the anode dissolves.
That is it. That is the whole idea. At each electrode, ask which particle gains, or loses, electrons more readily. The rules are that question, answered for the common cases.
Before you use the rules, test the anode rule on the commonest example.
Copper(II) sulfate solution is electrolysed with graphite electrodes. Copper forms at the cathode. What forms at the anode?
This box explains the anode product when copper(II) sulfate solution is electrolysed with inert electrodes.
Oxygen forms at the anode. Sulfate ions hold their electrons too tightly to be oxidised in solution, so water gives up electrons instead: 2H₂O → O₂ + 4H⁺ + 4e⁻. The H⁺ left behind, with the sulfate, makes the solution more and more acidic.
A student says: "In sodium chloride solution, Na⁺ ions go to the cathode, so sodium metal forms there." What actually forms, and why?
Show the answer
Hydrogen forms. The Na⁺ ions do drift towards the cathode, but sodium gives up electrons so readily that Na⁺ takes them back very reluctantly. Water takes electrons more readily: 2H₂O + 2e⁻ → H₂ + 2OH⁻. And even if a little sodium formed, it would react straight away with the water around it. Arriving at an electrode is not the same as reacting there.
Try the rules on eight solutions
Choose an electrolyte below. The explorer lists the particles that compete at each electrode, picks the winner with its reason, and shows what is left in the solution.
Choose an electrolyte. Before reading the result, decide what forms at each electrode.
This table gives the products of electrolysing eight solutions, with inert electrodes unless stated.
| Electrolyte | Cathode | Anode | Left in solution |
|---|---|---|---|
| CuSO₄(aq) | copper | oxygen | sulfuric acid |
| CuSO₄(aq), copper electrodes | copper | copper anode dissolves | copper(II) sulfate, unchanged |
| NaCl(aq), concentrated | hydrogen | chlorine | sodium hydroxide |
| NaCl(aq), dilute | hydrogen | mainly oxygen | sodium chloride, more concentrated |
| CuCl₂(aq), concentrated | copper | chlorine | water, as CuCl₂ is used up |
| H₂SO₄(aq), dilute | hydrogen | oxygen | sulfuric acid, more concentrated |
| AgNO₃(aq) | silver | oxygen | nitric acid |
| NaOH(aq) | hydrogen | oxygen | sodium hydroxide, more concentrated |
You should have noticed three patterns. Hydrogen forms at the cathode whenever the metal is very reactive. Oxygen forms at an inert anode whenever there is no concentrated halide. And in several cases, the only thing used up is water, so the solution left behind becomes more concentrated.
Worked examples
Predict the products, write the overall equation, and say what happens to the solution.
Think first. Copper is less reactive than hydrogen. Sulfate is never oxidised.
Cathode: Cu²⁺(aq) + 2e⁻ → Cu(s). Anode: 2H₂O(l) → O₂(g) + 4H⁺(aq) + 4e⁻. To match 4 electrons, double the cathode half-equation, then add:
The blue colour fades as Cu²⁺ is used up, and H⁺ builds up, so the solution becomes dilute sulfuric acid.
Check. Cu 2, H 4, O 2 on each side. Charge +4 on each side. ✓
Predict the products of electrolysing concentrated sodium chloride solution (brine), and write the overall equation.
Think first. Sodium is very reactive. Chloride is concentrated.
Cathode: 2H₂O(l) + 2e⁻ → H₂(g) + 2OH⁻(aq). Anode: 2Cl⁻(aq) → Cl₂(g) + 2e⁻. Both use 2 electrons, so add them, with the Na⁺ ions that stay in solution:
Check. Na 2, Cl 2, H 4, O 2 on each side. ✓
One current makes three useful chemicals: hydrogen, chlorine and sodium hydroxide. This is the chlor-alkali industry. Chlorine is used to treat water and to make plastics such as PVC, and sodium hydroxide is used to make soap and paper. The cell must keep the chlorine away from the sodium hydroxide, because they react together, as the balancing lecture showed when it made bleach.
Dilute sulfuric acid is electrolysed with platinum electrodes. Predict the products, and find the ratio of the volumes of the two gases.
Think first. The only cation is H⁺. The anion is sulfate, which is never oxidised.
Cathode: 4H⁺(aq) + 4e⁻ → 2H₂(g), written for 4 electrons. Anode: 2H₂O(l) → O₂(g) + 4H⁺(aq) + 4e⁻. Adding and cancelling the 4H⁺ on both sides gives
For every 4 electrons, 2 molecules of hydrogen and 1 of oxygen form. Equal numbers of gas molecules take up equal volumes at the same temperature and pressure, so the volume of hydrogen is twice the volume of oxygen.
Check. H 4 and O 2 on each side. ✓ The acid is not used up; only water is, so the acid becomes more concentrated. This is the electrolysis now used to make "green" hydrogen.
Impure copper is made the anode, and a thin sheet of pure copper the cathode, in acidified copper(II) sulfate solution. Explain what happens.
Think first. The anode is copper, not graphite. Copper atoms give up electrons more readily than water.
Anode: Cu(s) → Cu²⁺(aq) + 2e⁻, so the impure anode dissolves. Cathode: Cu²⁺(aq) + 2e⁻ → Cu(s), so pure copper builds up. Metals less reactive than copper, such as silver and gold, do not dissolve. They fall to the bottom as "anode slime", which is collected for its precious metals. Cathode copper made this way is more than 99.99% pure (source: Chen and Dutrizac, electrorefining study, via CORE).
Check. The two half-equations are exact reverses, so the Cu²⁺ in the solution stays about the same. ✓
Three traps
In a solution, sodium, potassium, calcium, magnesium and aluminium never form at the cathode. Water takes the electrons, and hydrogen is given off. These metals can be made only from molten compounds, which is why Davy had to melt potassium hydroxide.
Sulfate (SO₄²⁻) and nitrate (NO₃⁻) are not oxidised in solution. Do not write sulfur, SO₂ or nitrogen oxides at the anode. With an inert anode, the product is oxygen from water.
Two solutions of the same compound can give different products. Concentrated sodium chloride gives chlorine at the anode; dilute gives mainly oxygen. And a copper anode dissolves instead of giving any gas. Always check the concentration and what the anode is made of.
Work each one on paper first. Open a hint only when you are stuck.
-
Predict the product at each electrode, with inert electrodes: (a) potassium sulfate solution; (b) concentrated potassium bromide solution; (c) silver nitrate solution; (d) magnesium chloride solution, concentrated.
Hint 1
Cathode: is the metal less reactive than hydrogen?
Hint 2
Anode: is there a concentrated halide?
Full answer
(a) Hydrogen and oxygen. (b) Hydrogen and bromine. (c) Silver and oxygen. (d) Hydrogen and chlorine. Check: the very reactive metals K and Mg give hydrogen; silver, less reactive than hydrogen, deposits; sulfate and nitrate give oxygen; concentrated bromide and chloride give the halogen. ✓
-
Concentrated copper(II) chloride solution is electrolysed with graphite electrodes. (a) Write both half-equations. (b) Write the overall equation. (c) What would you see at each electrode, and how would the solution change?
Hint 1
Copper is less reactive than hydrogen, and chloride is concentrated.
Hint 2
Both half-equations use 2 electrons.
Full answer
(a) Cathode: Cu²⁺(aq) + 2e⁻ → Cu(s). Anode: 2Cl⁻(aq) → Cl₂(g) + 2e⁻. (b) CuCl₂(aq) → Cu(s) + Cl₂(g). (c) A pink-brown coating of copper on the cathode; pale green gas bubbling at the anode, with a sharp smell. The colour of the solution fades as the copper(II) chloride is used up. Check: Cu 1 and Cl 2 on each side, and 2 electrons each way. ✓
-
In the electrolysis of dilute sulfuric acid, 40 cm³ of oxygen is collected. (a) What volume of hydrogen is collected at the same time, at the same temperature and pressure? (b) Explain why the acid becomes more concentrated.
Hint 1
Use the overall equation 2H₂O → 2H₂ + O₂.
Hint 2
Which substance is actually used up?
Full answer
(a) 2 molecules of hydrogen form for each molecule of oxygen, so the volume is cm³. (b) The H⁺ used at the cathode is replaced by the H⁺ made at the anode, and sulfate is not discharged. Only water is used up, so the same amount of acid is in less water. Check: the two half-equations each move 4 electrons for 2 H₂ and 1 O₂. ✓
-
A stretch. A student electrolyses concentrated sodium chloride solution in a beaker, with a few drops of universal indicator added and no barrier between the electrodes. (a) What colour does the indicator turn near each electrode, and why? (b) After a while, the chlorine smell fades and the solution starts to bleach the indicator. Explain, using the balancing lecture. (c) Why do industrial cells separate the two electrodes?
Hint 1
(a) Which half-equation makes OH⁻? Chlorine also dissolves in water to make an acidic, bleaching solution.
Hint 2
(b) The balancing lecture made bleach from chlorine and sodium hydroxide: Cl₂ + 2OH⁻ → Cl⁻ + ClO⁻ + H₂O.
Full answer
(a) Near the cathode it turns blue or purple, because 2H₂O + 2e⁻ → H₂ + 2OH⁻ makes hydroxide ions. Near the anode it turns red at first, because chlorine dissolves to form an acidic solution, and then it is bleached. (b) The chlorine from the anode mixes with the hydroxide from the cathode and reacts: Cl₂ + 2OH⁻ → Cl⁻ + ClO⁻ + H₂O. The ClO⁻ (chlorate(I)) is bleach, and this uses up the chlorine. (c) Industry wants chlorine and sodium hydroxide as separate products, so the cell keeps them apart. Check: the bleach equation balances, Cl 2, O 2, H 2, charge −2 on each side. ✓
Every rule in this lecture comes from one question: which particle gains or loses electrons most readily? The reactivity series answers it at the cathode, and the strength with which anions hold their electrons answers it at the anode. These are two views of the same property, the tendency of each particle to give up or take electrons.
At Pre-University, standard electrode potentials put a number on that tendency for every half-equation, and the rules here become one comparison. They also explain the exceptions, such as zinc. Before that, the next lecture asks how much: how many grams of copper, or cubic centimetres of hydrogen, a given current makes in a given time.
- In a solution, water competes with the dissolved ions at both electrodes: it can be reduced to hydrogen or oxidised to oxygen.
- At the cathode, a metal less reactive than hydrogen (copper, silver) is deposited; for very reactive metals, hydrogen forms instead.
- At an inert anode, a concentrated halide gives the halogen; sulfate, nitrate or a dilute halide gives oxygen from water.
- An active anode, such as copper, dissolves instead, which is the basis of copper refining and plating.
- Concentrated sodium chloride solution gives hydrogen, chlorine and sodium hydroxide, the chlor-alkali process.
- Each rule answers one question: which particle gains or loses electrons most readily?