MathemagiciansLibraryExplorationsDeep Dives
← Chemistry · Upper Secondary
ChemistryUpper Secondary

Faraday's laws — quantitative electrolysis

CU8 — Redox and Electrochemistry › CU8.2 — ElectrolysisLecture 3 of 3~2320 words

How much, not just what

The last two lectures answered the question "what forms?" Copper at the cathode. Oxygen at the anode. Hydrogen, if the metal is too reactive. The last lecture ended with a promise: the next question is how much. How many grams of copper, or cubic centimetres of hydrogen, does a given current make in a given time? Here it is.

This question matters in industry. A company plating a ring with gold pays for every milligram. An aluminium smelter pays for every unit of electricity. Both need to know exactly how much product each unit of electricity buys.

The answer comes from one idea that you already have. At the cathode, each copper ion needs two electrons to become an atom. So if you can count the electrons that flow through the circuit, you can count the copper atoms. The whole lecture is that counting, done carefully. It has three links: from current and time to charge, from charge to moles of electrons, and from moles of electrons to moles of product.

Link 1: current and time give charge

An electric current is a flow of charge. A current of 1 ampere means 1 coulomb of charge passes each point in the circuit every second. So the total charge that flows is the current multiplied by the time :

The time must be in seconds, because an ampere is a coulomb per second. A current of 3.00 A for 20.0 minutes gives C. It does not give C.

Link 2: charge gives moles of electrons

A coulomb is a huge number of electrons, and chemists count particles in moles. So we need the charge carried by one mole of electrons. This is the Faraday constant, :

The Faraday constant

One mole of electrons carries a charge of C, to 3 significant figures.

moles of electrons

Where does 96 500 come from? One electron carries a charge of C. One mole contains electrons. Multiply them: C. Since 2019, both of these numbers have fixed, exact values in the SI system of units, so is exact too: 96 485.332 12… C/mol. Exam papers give 96 500 C/mol, and so does this lecture. (Source: NIST, The International System of Units, 2019.)

Link 3: moles of electrons give moles of product

This link comes from the half-equation, and it is where the chemistry lives. The half-equation tells you how many electrons each particle of product needs. Call that number .

Half-equationElectrons per particle of product1 mol of electrons makes
Ag⁺(aq) + e⁻ → Ag(s)11 mol Ag
Cu²⁺(aq) + 2e⁻ → Cu(s)2½ mol Cu
Al³⁺(l) + 3e⁻ → Al(l)3⅓ mol Al
2H₂O(l) + 2e⁻ → H₂(g) + 2OH⁻(aq)2½ mol H₂
2H₂O(l) → O₂(g) + 4H⁺(aq) + 4e⁻4¼ mol O₂

So moles of product = moles of electrons ÷ . Notice that is not always the charge on an ion. For oxygen, : each O₂ molecule is made from two oxygen atoms, and each of them gives up two electrons. Always read from the half-equation, per particle of the product you want.

Put the three links together:

Quantitative electrolysis

moles of product

Then mass = moles × , or, for a gas, volume = moles × 24 000 cm³ at r.t.p.

That is it. That is the whole idea. Count the electrons, then share them out using the half-equation. The formula is only the three links written in one line. If you forget it, rebuild it from the links.

Worked examples

Relative atomic masses used here: Cu 64, Ag 108, Al 27. Molar gas volume at r.t.p. (about 20 °C and 1 atmosphere): 24 dm³/mol, which is 24 000 cm³/mol.

Worked Example 1 — Grams of copper

A current of 3.00 A passes through copper(II) sulfate solution for 20.0 minutes. What mass of copper is deposited at the cathode?

Think first. Charge, then moles of electrons, then moles of copper. Cu²⁺ + 2e⁻ → Cu, so .

s. C.

Moles of electrons mol.

Moles of copper mol. Mass g.

Check. Keep the full calculator value until the last line: , so 1.19 g. ✓ About 1 g in 20 minutes is a sensible amount for a school experiment.

Worked Example 2 — Cubic centimetres of gas, and the 2 : 1 ratio

A current of 2.00 A passes through dilute sulfuric acid, with inert electrodes, for 30.0 minutes. Find the volumes of hydrogen and oxygen at r.t.p.

Think first. One current, two electrodes. Every electron that leaves the anode arrives at the cathode, so both electrodes handle the same number of electrons.

C. Moles of electrons mol.

Cathode, : moles of H₂ , volume cm³.

Anode, : moles of O₂ , volume cm³.

Check. 448 : 224 is 2 : 1. ✓ The last lecture said water splits into hydrogen and oxygen in a 2 : 1 ratio by volume. Now you can see why: the same electrons make one H₂ for every 2 and one O₂ for every 4.

Worked Example 3 — Working backwards to the current

1.50 g of silver is deposited in 45.0 minutes. What current was used?

Think first. Run the chain backwards: mass, moles of silver, moles of electrons, charge, current. Ag⁺ + e⁻ → Ag, so .

Moles of Ag mol, so moles of electrons mol.

C. s. A.

Check. Forwards again: g. ✓

Worked Example 4 — Two cells in one circuit

A silver cell and a copper cell are connected one after the other in the same circuit. After some time, 2.16 g of silver has been deposited. What mass of copper has been deposited?

Think first. The same current flows through both cells for the same time, so the same number of electrons passes through each. You do not need , or .

Moles of Ag mol, so moles of electrons mol.

Moles of Cu mol. Mass g.

Check. The same electrons deposit half as many copper atoms, each about 0.6 times the mass of a silver atom. . ✓

Faraday's two laws

Michael Faraday found these rules by experiment, sixty years before the electron was discovered. He passed one current through several cells in a row and collected what each one produced. In his Seventh Series of researches on electricity, published in 1834, he reported two laws. The same paper introduced words you now use every day: electrode, electrolyte, anode, cathode, anion, cation and ion. The words anode, cathode and ion were suggested to him by the scholar William Whewell. (Sources: Faraday, Philosophical Transactions 124, 1834; Faraday–Whewell letters, April–May 1834.)

Faraday's laws of electrolysis

First law: the mass of a substance produced at an electrode is proportional to the charge passed.

Second law: for the same charge, the mass produced is proportional to , the molar mass divided by the electrons needed per particle.

Both laws are already inside the three links. Double the charge and you double the electrons, so you double the product: that is the first law. Pass the same charge through different cells and each gets the same electrons, which it shares out by its own : that is the second law, and it is Worked Example 4. The figure shows the kind of arrangement Faraday used.

+−d.c. supplyAgNO₃(aq)cathode: AgCuSO₄(aq)cathode: CuH₂SO₄(aq)H₂ and O₂
Three cells connected one after another in one circuit. Every electron that flows round the loop passes through every cell, so all three cells receive exactly the same charge. Each cell shares the electrons out according to its own half-equation.

Try it below. Set a current and a time, and watch how the same electrons divide between the cells.

Explore — one charge, four products

Set the current and the time. The same charge flows through a silver cell, a copper cell and a dilute acid cell connected in series. Watch the charge, the moles of electrons, and how they are shared out.

This table shows what 2.00 A for 30 minutes produces in each cell: 3600 C, which is about 0.0373 mol of electrons.

ProductElectrons per particleMolesAmount
silver10.03734.03 g
copper20.01871.19 g
hydrogen20.0187448 cm³
oxygen40.009 33224 cm³

Doubling the current or the time doubles every row. The moles are always in the ratio 1 : ½ : ½ : ¼.

You should have seen two things. Doubling either the current or the time doubles every product: the first law. And the moles always come out in the ratio 1 : ½ : ½ : ¼ for silver, copper, hydrogen and oxygen, whatever the charge, because each one needs 1, 2, 2 or 4 electrons: the second law.

Stop and think

A student says: "Copper ions have a bigger charge than silver ions, so the same current deposits more copper than silver." Is the student right?

Show the answer

No. It is the other way round. Each copper ion needs two electrons, so the same electrons make only half as many copper atoms as silver atoms. A bigger charge on the ion means fewer atoms per mole of electrons, not more. In mass, 1 mol of electrons gives 108 g of silver but only 32 g of copper.

A real case: one cell in an aluminium smelter

Real case — how much aluminium does one cell make in a day?

Aluminium is made by electrolysing aluminium oxide dissolved in molten cryolite, as the electrolysis lecture described. A modern smelter has hundreds of cells connected in series, so the same huge current passes through every one. At one smelter in the United Arab Emirates, a line of cells ran at about 400.7 kA in 2014–15, with each cell producing about 3 050 kg of aluminium per day. (Source: Ba Raheem, Kumar and Akhmetov, "DX cell technology at 400 kA and beyond", ICSOBA 2015.)

Prediction. Al³⁺ + 3e⁻ → Al, so . In one day, C. Using the exact value of , moles of electrons , so moles of Al . Using the more precise g/mol, the mass is about 3 230 kg.

What happened. The cell made about 3 050 kg, about 94.5% of the prediction. The same paper reports a "current efficiency" of about 95%.

Verdict. Faraday's laws predict the output of an industrial cell to within about 5%. The missing 5% is not a failure of the laws. A little of the aluminium dissolves back into the molten bath and reacts again, so some electrons are used twice for the same metal. Engineers measure how close a cell comes to Faraday's prediction, and they call that number the current efficiency.

The working below has a classic mistake. Find it.

Spot the error — copper from a current

The question: a current of 1.50 A passes through copper(II) sulfate solution for 15.0 minutes. What mass of copper is deposited? One line of this working is wrong. Tap it.

This working answers: a current of 1.50 A passes through copper(II) sulfate solution for 15.0 minutes; what mass of copper is deposited? One line is wrong.

  • Line 1: t = 15.0 × 60 = 900 s.
  • Line 2: Q = It = 1.50 × 900 = 1350 C.
  • Line 3: moles of electrons = 1350 ÷ 96 500 ≈ 0.0140 mol.
  • Line 4: at the cathode, Cu²⁺ + 2e⁻ → Cu.
  • Line 5: so moles of copper = moles of electrons ≈ 0.0140 mol, and mass ≈ 0.895 g. This is the wrong line. Each copper atom needs 2 electrons, so moles of Cu = 0.0140 ÷ 2 ≈ 0.006 99 mol, and the mass is ≈ 0.448 g.
  • Line 6: check: 0.0140 mol of copper would need 0.0280 mol of electrons, twice the amount that flowed.

Three traps

Trap 1 — Time in minutes

needs in seconds. Using minutes makes every answer 60 times too small. Convert first, on its own line.

Trap 2 — The wrong n

is the number of electrons per particle of the product, read from the half-equation. It is 2 for Cu, 3 for Al, 2 for H₂ and 4 for O₂. Do not use 1 for everything, and do not use the charge on the ion when the product is a gas made from a molecule.

Trap 3 — Rounding too early

Keep the full calculator value of the moles until the last line. Rounding 0.018 65 up to 0.0187 in Worked Example 1 would give 1.20 g instead of 1.19 g. Small rounding errors grow when you multiply by a large molar mass.

Try it yourself

Work each one on paper first. Open a hint only when you are stuck. Use Ag 108, Zn 65, Cr 52, F = 96 500 C/mol and 24 000 cm³/mol at r.t.p.

  1. A current of 0.500 A flows through silver nitrate solution for 2.00 hours. (a) What charge flows? (b) How many moles of electrons is that? (c) What mass of silver is deposited?

    Hint 1

    2.00 hours is how many seconds?

    Hint 2

    For silver, .

    Full answer

    (a) s, so C. (b) mol. (c) Moles of Ag = 0.0373 mol, mass g. Check: the same charge as Worked Example 1 gives twice the moles of silver as of copper, and . ✓

  2. A steel bracket is to be coated with 0.650 g of zinc from a zinc sulfate solution, using a current of 0.400 A. How long will it take, in minutes? Assume all the current deposits zinc.

    Hint 1

    Work backwards: mass → moles of Zn → moles of electrons → charge → time.

    Hint 2

    Zn²⁺ + 2e⁻ → Zn, so .

    Full answer

    Moles of Zn mol. Moles of electrons mol. C. s minutes. Check: g. ✓ (The last lecture said zinc can be deposited from solution under the right conditions. In practice some current also makes hydrogen, so a real coating would take longer.)

  3. Concentrated sodium chloride solution is electrolysed with inert electrodes at 0.200 A for 1.00 hour. Name the gas at each electrode and find each volume at r.t.p.

    Hint 1

    From the last lecture: concentrated chloride gives chlorine at the anode; sodium is too reactive, so the cathode makes hydrogen.

    Hint 2

    2Cl⁻ → Cl₂ + 2e⁻ and 2H₂O + 2e⁻ → H₂ + 2OH⁻: for both.

    Full answer

    C. Moles of electrons mol. Chlorine at the anode: mol, about 89.5 cm³. Hydrogen at the cathode: the same, about 89.5 cm³. Check: both need 2 electrons per molecule, so the volumes must be equal, 1 : 1, unlike water's 2 : 1. ✓ (In a real cell slightly less chlorine is collected, because chlorine dissolves a little in water.)

  4. A stretch. A charge of 5790 C deposits 1.04 g of chromium (Cr 52) from a solution of a chromium salt. (a) Find the charge on the chromium ions in the solution. (b) Using mol⁻¹, estimate the charge on one electron from , as physicists first could once was known.

    Hint 1

    (a) Find the moles of electrons and the moles of chromium. Their ratio is .

    Hint 2

    (b) is the charge on one mole of electrons, so divide by the number of electrons in a mole.

    Full answer

    (a) Moles of electrons mol. Moles of Cr mol. Electrons per Cr atom , so the ions are Cr³⁺. (b) C. Check: this is the known value of the electron's charge, C. ✓ Electrolysis connects a measurement on a laboratory bench to the charge of a single electron.

The bigger idea

Faraday's laws said something that nobody could yet explain. A fixed amount of electricity always released a fixed amount of each element, as if electricity itself came in small, equal pieces attached to atoms. The title of his 1834 paper speaks of "the absolute quantity of electricity associated with the particles or atoms of matter". Decades later, the electron was discovered, and its charge was measured. The pieces were real, and turned out to be simply the charge of one electron multiplied by the number of particles in a mole.

The same counting runs modern industry. It sets how long a part stays in a plating bath, how much copper a refinery can purify in a day, and how much electricity a tonne of aluminium costs. And it works in reverse inside every rechargeable battery: the charge a battery can store is set by how many moles of electrons its electrode reactions can hand over. The Pre-University electrochemistry lectures take this further, with electrode potentials.

Key concepts in this lesson