- Oxidation states — assigning them systematically
- Balancing redox equations — the half-equation method
- Standard electrode potentials · coming soon
An oxidation with no oxygen in it
You probably learned that oxidation means "gaining oxygen". Iron rusts: it gains oxygen. Magnesium burns with a white flame: it gains oxygen. So far, so good.
Now dip a strip of zinc into blue copper(II) sulfate solution. Within minutes, a brown coat of copper forms on the zinc, and the blue colour slowly fades. Chemists call what happened to the zinc an oxidation. But no oxygen was gained. The oxygen atoms in the sulfate ions were there before and after, untouched.
So either chemists are using the word carelessly, or "gaining oxygen" was never the real idea. It is the second. This lecture shows what oxidation really is, why it always comes with a partner process called reduction, and how to see both at the level of electrons.
Where the old words came from
The words are older than our understanding. "Reduction" comes from metal-working. When a metal ore, such as an oxide, was heated with charcoal, the pure metal was left behind, and it weighed less than the ore. The ore had been "reduced" to the metal: led back to it, from the Latin reducere. "Oxidation" was named in 1787 by Antoine Lavoisier and his colleagues in Paris, for combining with oxygen. (Sources: Online Etymology Dictionary, "oxidation" and "reduce"; W. B. Jensen, "The Origin of the Oxidation-State Concept", J. Chem. Educ., 2007.)
Both definitions were about oxygen, because oxygen was the element chemists could see doing these jobs. Only in the early twentieth century, after the electron was discovered, did chemists see what all these reactions share underneath.
What really moves: electrons
Start with a reaction you already know. The lecture on ionic bonding showed magnesium burning in oxygen. Each magnesium atom gives 2 electrons to an oxygen atom, and the ions Mg²⁺ and O²⁻ form. Now burn magnesium in chlorine instead. The product is magnesium chloride, MgCl₂. There is no oxygen at all. Yet each magnesium atom does exactly the same thing: it loses 2 electrons and becomes Mg²⁺.
To magnesium, the two reactions are the same event. In both, it loses electrons. That is what chemists now mean by oxidation.
Oxidation is the loss of electrons.
Reduction is the gain of electrons.
A reaction in which both happen is a redox reaction (from reduction and oxidation).
Notice how this fits the old words. A metal gaining oxygen loses electrons to the oxygen: oxidation, in both senses. A metal ion in an ore gains electrons when it becomes metal again: reduction, in both senses. The electron definition keeps every old example and adds many new ones.
Why must the two always happen together? Because electrons cannot appear from nowhere or vanish into nothing. If one particle loses electrons, another particle must take them. So in every redox reaction, the number of electrons lost equals the number gained. That is it. That is the whole idea. Everything else in this topic is bookkeeping for those electrons.
Seeing it happen: zinc in copper sulfate
Before reading on, decide what you expect to see.
A clean strip of zinc is placed in blue copper(II) sulfate solution and left for ten minutes. What do you expect to see?
This box describes what happens when zinc is placed in copper(II) sulfate solution, and why.
A brown layer of copper forms on the zinc, and the blue colour of the solution fades. Zinc atoms give electrons to copper(II) ions. The copper ions become copper atoms on the surface of the zinc. The zinc atoms become colourless zinc ions in the solution. The blue colour came from the copper(II) ions, so it fades as they are used up.
Here is what happens to the particles.
The full equation is . But the sulfate ions are the same at the start and the end. Ions that take no part in a reaction are called spectator ions. Leave them out, and you have the ionic equation, which shows only what changes:
Now split it into two parts, one for each particle. Each part is called a half-equation, and it shows the electrons as e⁻:
The first loses electrons, so zinc is oxidised. The second gains electrons, so the copper(II) ion is reduced. Check each half-equation by its charge. On the left of the first, the charge is 0. On the right, it is +2 + 2 × (−1) = 0. ✓ The second: +2 − 2 = 0 on the left, and 0 on the right. ✓ The 2 electrons lost by zinc are the 2 electrons gained by copper, so they cancel when the halves are added.
Who does what to whom: oxidising and reducing agents
Chemists also name the particles by what they do to each other.
- The copper(II) ion takes electrons from zinc. By taking them, it causes the zinc to be oxidised. So Cu²⁺ is the oxidising agent. In doing this, it gains electrons: the oxidising agent is itself reduced.
- Zinc gives electrons to the copper ion. By giving them, it causes the copper ion to be reduced. So zinc is the reducing agent. In doing this, it loses electrons: the reducing agent is itself oxidised.
This is the part students most often get backwards, so slow down here. An agent is named for what it does to the other particle, not for what happens to itself. A teacher who teaches you is not taught by you. In the same way, an oxidising agent oxidises something else, and the price is that it is reduced.
A common memory aid is OIL RIG: Oxidation Is Loss, Reduction Is Gain (of electrons). Use it only after you understand the reason. The aid tells you which word goes with which direction. It cannot tell you which particle is the agent.
A student writes: "Cu²⁺ is reduced, so Cu²⁺ is the reducing agent." Is the student right?
Show the answer
No. Cu²⁺ is reduced, so it must have taken electrons from something. Taking electrons oxidises that other thing, so Cu²⁺ is the oxidising agent. The particle that is reduced is always the oxidising agent, and the particle that is oxidised is always the reducing agent. The agent's name describes its effect on its partner.
Worked examples
. Write the half-equations and name the agents.
Think first. Magnesium oxide is ionic: Mg²⁺ and O²⁻. So magnesium atoms lose 2 electrons, and oxygen atoms gain 2.
Magnesium is oxidised and is the reducing agent. Oxygen is reduced and is the oxidising agent. The name "oxidising agent" comes from oxygen itself, the first oxidising agent anyone studied.
Check. 4 electrons lost and 4 gained. ✓ Each oxygen molecule has two atoms, so it needs 4 electrons, which is why two magnesium atoms react with each O₂. ✓
The lecture on reactivity trends showed that chlorine water turns potassium bromide solution orange: . Find the spectator ions, the ionic equation and the agents.
Think first. K⁺ ions appear on both sides unchanged, so they are spectators.
Half-equations: (gain, so chlorine is reduced) and (loss, so bromide is oxidised). Chlorine is the oxidising agent; bromide ions are the reducing agent.
So "chlorine is more reactive than bromine" means, in electron language, "chlorine pulls electrons more strongly". It takes them away from the bromide ions.
Check. 2 electrons each way. ✓ Charge on the left −2, on the right −2. ✓
Aluminium foil in copper(II) chloride solution: . Why 2 and 3?
Each aluminium atom loses 3 electrons: . Each copper(II) ion gains 2: . The electrons lost must equal the electrons gained. The smallest number that both 3 and 2 divide into is 6. So 2 aluminium atoms lose 6 electrons, and 3 copper ions gain those 6.
Check. Charge on the left: 3 × (+2) = +6. On the right: 2 × (+3) = +6. ✓ The method of matching electrons is developed fully in the lecture on balancing redox equations.
Now practise spotting the roles. In each card, the particle named is part of the reaction shown.
Put each particle in a box. Ask: does it lose electrons, gain electrons, or stay exactly as it was?
This box sorts nine particles from four reactions, with the reason for each.
- Oxidised (loses electrons). Zn in Zn + CuSO₄: becomes Zn²⁺. Mg in 2Mg + O₂: becomes Mg²⁺. Br⁻ in Cl₂ + 2KBr: becomes Br₂. Fe in Fe + CuSO₄: becomes Fe²⁺.
- Reduced (gains electrons). Cu²⁺ in Zn + CuSO₄: becomes Cu. O₂ in 2Mg + O₂: becomes O²⁻. Cl₂ in Cl₂ + 2KBr: becomes Cl⁻.
- Spectator (unchanged). SO₄²⁻ in Zn + CuSO₄. K⁺ in Cl₂ + 2KBr.
The rule: follow each particle from the left side to the right. If it ends with fewer electrons, it was oxidised; with more, it was reduced; if it is unchanged, it is a spectator.
Notice that two ions, sulfate and potassium, did nothing at all. Spotting the spectators first makes the redox part much easier to see.
Redox all around you
Once you look for electron transfer, you find it everywhere. Rusting is iron losing electrons to oxygen, helped by water. Burning a fuel is a fast oxidation. In respiration, your cells oxidise glucose, and oxygen is the final electron taker. Photosynthesis runs the other way: plants use the energy of light to take electrons from water and use them to reduce carbon dioxide to sugar.
A battery is a redox reaction with the two halves kept apart. In 1836, John Frederic Daniell built a cell with zinc in one solution and copper in copper sulfate in another, separated by a barrier that let ions through. The zinc could not hand its electrons straight to the copper ions. They had to travel through an outside wire, and that flow of electrons is an electric current. Daniell cells powered telegraph networks for decades. With modern standard solutions, such a cell gives about 1.10 V. (Source: "Daniell cell", Wikipedia; IEEE Engineering and Technology History Wiki, "Daniell Cell".) The electrochemistry lectures build on exactly this idea.
Three traps
The oxidising agent is reduced, and the reducing agent is oxidised. Find what is oxidised and what is reduced first. Then swap the words to name the agents.
In zinc and copper sulfate, the sulfate ion contains oxygen and is in the reaction mixture, but it does not change. Only particles whose electrons change are oxidised or reduced. Write the ionic equation first.
In an oxidation, the electrons appear on the right, as a product: they are released. In a reduction, they appear on the left: they are used up. Check every half-equation by adding up the charge on each side. The two sides must match.
Work each one on paper first. Open a hint only when you are stuck.
-
Sodium burns in chlorine: . Write the two half-equations. State what is oxidised, what is reduced, and name the oxidising agent and the reducing agent.
Hint 1
Sodium chloride is made of Na⁺ and Cl⁻ ions.
Hint 2
Each sodium atom loses 1 electron; each Cl₂ molecule needs 2.
Full answer
and . Sodium is oxidised (it loses electrons), so sodium is the reducing agent. Chlorine is reduced (it gains electrons), so chlorine is the oxidising agent. Check: 2 electrons lost, 2 gained; each half-equation has the same charge on both sides (0 = +2 − 2; 0 − 2 = −2). ✓
-
Magnesium ribbon fizzes in dilute hydrochloric acid: . (a) Which ions are spectators? (b) Write the ionic equation and the two half-equations. (c) Explain why this is a redox reaction, even though it is usually taught as "metal + acid".
Hint 1
In solution, HCl is H⁺ and Cl⁻ ions, and MgCl₂ is Mg²⁺ and Cl⁻ ions. Which ion is unchanged?
Hint 2
Hydrogen ions become hydrogen gas. Do they gain or lose electrons?
Full answer
(a) The chloride ions, Cl⁻. (b) . Half-equations: and . (c) Magnesium loses electrons (oxidised) and hydrogen ions gain them (reduced), so both processes happen: it is redox. H⁺ is the oxidising agent. Check: charge +2 on both sides of the ionic equation. ✓
-
Magnesium is more reactive than copper, and copper is more reactive than silver. For each mixture, say whether a reaction happens. If it does, write the ionic equation and say which particle is oxidised. (a) Magnesium ribbon in copper(II) sulfate solution. (b) Copper wire in magnesium sulfate solution. (c) Copper wire in silver nitrate solution (silver ions are Ag⁺).
Hint 1
A more reactive metal gives up electrons more readily. It can give them to the ions of a less reactive metal.
Hint 2
(c) Each copper atom loses 2 electrons, but each silver ion takes only 1. How many silver ions per copper atom?
Full answer
(a) Yes: . Magnesium is oxidised. (b) No reaction: copper gives up electrons less readily than magnesium, so it cannot reduce Mg²⁺ ions. (c) Yes: . Copper is oxidised, and the solution slowly turns blue as Cu²⁺ ions form. Check (c): 2 electrons lost by one copper atom, 1 gained by each of 2 silver ions; charge +2 on both sides. ✓
-
A stretch. The thermite reaction is used to weld railway tracks: . Iron(III) oxide contains Fe³⁺ and O²⁻ ions, and aluminium oxide contains Al³⁺ and O²⁻ ions. (a) What is oxidised and what is reduced? (b) Which particle is a spectator, even though this reaction has no solution? (c) How many moles of electrons are transferred when 2.7 g of aluminium reacts completely? (Al = 27.0 g/mol.)
Hint 1
Follow each particle: Al atoms become Al³⁺; Fe³⁺ ions become Fe atoms; O²⁻ ions stay O²⁻.
Hint 2
(c) Find the moles of aluminium first. Each aluminium atom loses 3 electrons.
Full answer
(a) Aluminium is oxidised: . Iron(III) ions are reduced: . So aluminium is the reducing agent and Fe³⁺ is the oxidising agent. (b) The oxide ions, O²⁻. They begin bonded to iron and end bonded to aluminium, but each one is O²⁻ throughout, so it neither gains nor loses electrons. A spectator does not have to be in solution. (c) mol of aluminium. Each atom loses 3 electrons, so mol of electrons are transferred. Check: the same 0.30 mol is gained by 0.10 mol of Fe³⁺, 3 each, which matches the 1 : 1 ratio of Al to Fe in the equation. ✓
The reactivity series of metals is really a list of how readily each metal gives away electrons in a reaction. A metal higher in the series can reduce the ions of a metal below it, as zinc reduced copper(II) ions. The halogen order is the mirror image: a list of how strongly each one takes electrons. So "reactivity" in this course and "electron transfer" are the same story.
Be careful with one shortcut, though. It is tempting to say that electrons always flow towards the element with the higher electronegativity. Electronegativity, from the periodic trends lectures, describes the pull on shared electrons in a bond. How readily a metal gives up electrons in a solution also depends on other energy changes, such as how strongly the new ions attract water molecules. The ideas are related, but they are not the same measure. At Pre-University, standard electrode potentials measure the tendency to gain or lose electrons in solution directly.
The next lecture adds a bookkeeping tool, oxidation states, for reactions where electrons are shared rather than fully transferred.
- Oxidation is the loss of electrons and reduction is the gain of electrons, and a reaction with both is a redox reaction.
- Oxidation and reduction always happen together, because the electrons lost by one particle must be gained by another.
- A half-equation shows one particle's change with the electrons written as e⁻, and its charge must be the same on both sides.
- The oxidising agent takes electrons and is itself reduced, while the reducing agent gives electrons and is itself oxidised.
- Spectator ions are unchanged in a reaction, and leaving them out gives the ionic equation.
- A more reactive metal can reduce the ions of a less reactive metal, because it gives up electrons more readily.