- Alkenes: addition reactions
- Halogenoalkanes
- Radical halogenation of alkanes · coming soon
Unreactive, and yet the best fuels we have
Pour an acid onto candle wax and nothing happens. Pour an alkali onto it, and still nothing. Leave it next to most chemicals in a laboratory for years, and it does not change. Candle wax is a mixture of large alkanes. Their old name, paraffins, comes from Latin words meaning "little affinity": little tendency to react.
Now light the wick. The same wax burns steadily for hours, releasing a lot of heat. Natural gas, bottled gas, petrol, diesel and jet fuel are all mostly alkanes. They are the fuels that much of the world runs on.
So which is true? Are alkanes unreactive, or are they some of the most energetic substances we handle? Both, and the reason is the key to this lecture. "Unreactive" will turn out to mean "slow to start", not "has no energy to give".
The homologous series lecture gave the family's general formula, CₙH₂ₙ₊₂. This lecture looks at the molecules themselves, at their physical properties, and at the two reactions alkanes do take part in: burning, and substitution by halogens.
The shape of an alkane
Alkanes contain only carbon and hydrogen, joined by single bonds. Each carbon forms four single bonds. Because they hold as many hydrogen atoms as possible, alkanes are called saturated.
Around each carbon there are four bonding pairs of electrons and no lone pairs. The pairs repel each other equally, so they spread as far apart as they can in three dimensions. That arrangement is a tetrahedron, with an angle of 109.5° between any two bonds.
A chain of carbons is therefore a zigzag. And the chain can twist. Each part of the molecule can rotate about a single bond, like a wheel on an axle, so a long alkane is flexible. It can stretch out straight, or curl up.
Physical properties: weak forces, no water
Carbon and hydrogen have similar electronegativities (2.55 and 2.20). So a C–H bond is almost non-polar, and an alkane molecule has no permanent dipole. The only forces between alkane molecules are London dispersion forces. Those forces grow with the size of the molecule, as the homologous series lecture showed. So the smallest alkanes, methane to butane, are gases at room temperature. Pentane to about C₁₆ are liquids. Larger ones, like candle wax, are solids.
Alkanes do not dissolve in water. Here is why. Water molecules hold each other with hydrogen bonds. To make room for an alkane, some of those hydrogen bonds would have to break. In return, the water would get only weak London forces with the alkane. That trade costs energy, so the alkane stays out. Liquid alkanes are also less dense than water, so they float on it. This is why spilled oil spreads as a layer on the sea.
Alkanes do mix well with other non-polar substances, such as oils, fats and grease. That is why some alkanes are used as solvents for cleaning off grease.
Why alkanes resist most reagents
Most reactions you have met involve something attracted to a charge. An acid gives H⁺ ions, which are drawn to negative regions. Many reagents look for a part of a molecule that is slightly positive or slightly negative.
An alkane offers neither. Its bonds are almost non-polar, so there is no charged region to attack. Its bonds are also strong: about 346 kJ/mol for C–C and 416 kJ/mol for C–H. With nothing to attract a reagent and nothing easy to break, alkanes ignore acids, alkalis and most other chemicals.
That is it. That is the whole idea of alkane chemistry. An alkane only reacts when something can break one of its strong bonds without needing a charge to aim at. Two things can do that: a very hot reaction with oxygen, and a reactive atom with an unpaired electron. These are the two reactions in the rest of this lecture.
Complete combustion
When an alkane burns in plenty of oxygen, every carbon atom ends up in carbon dioxide and every hydrogen atom in water. This is complete combustion. For methane, the main gas in natural gas:
You do not need to memorise any combustion equation. Balance it in three steps: carbon first, then hydrogen, then oxygen last, because oxygen appears in both products.
Write the equation for the complete combustion of propane, C₃H₈. Then find a rule for any alkane CₙH₂ₙ₊₂.
Carbon. 3 carbon atoms make 3CO₂.
Hydrogen. 8 hydrogen atoms make 4H₂O.
Oxygen. The products hold oxygen atoms, so 5O₂ is needed.
Any alkane. CₙH₂ₙ₊₂ gives CO₂ and H₂O. The oxygen atoms needed are . So the number of O₂ molecules is .
Check: for propane, gives . ✓ For methane, gives 2. ✓
Octane, C₈H₁₈, is a main part of petrol. Write its complete combustion equation with whole numbers.
The rule gives O₂ for one octane molecule. Half a molecule is fine in a molar equation, but you can remove it by doubling everything:
Check: C: 16 = 16. H: 36 = 36. O: 50 on the left, on the right. ✓
Notice how much CO₂ this makes. One kilogram of octane is mol. It forms mol of CO₂, which is kg. Burning 1 kg of petrol makes about 3 kg of carbon dioxide. The extra mass is oxygen, taken from the air.
Methane releases 890 kJ/mol when it burns. So why does a gas stove not light itself the moment you turn the gas on?
Show the answer
To react, some bonds in methane and oxygen must break first. That needs energy, the activation energy. At room temperature, almost no molecules collide with enough energy, so the reaction is extremely slow.
A spark or a flame gives a few molecules that energy. Once they react, the heat they release gives the next molecules enough energy, and the flame keeps itself going. This is what "unreactive" means for alkanes: slow to start, not short of energy.
All alkanes burn to the same two products. So do they all make the same amount of CO₂ for the heat you get? Make a prediction.
Methane releases 890 kJ/mol and makes 1 CO₂. Octane releases 5470 kJ/mol and makes 8 CO₂. For the same amount of heat, which makes less carbon dioxide? Choose one.
The chart shows the mass of CO₂ made for every megajoule (1000 kJ) of heat. Methane makes about 49 g, octane about 64 g.
The numbers come from one line of arithmetic each. Methane: 44.0 g of CO₂ for 890 kJ, which is about 49.4 g per 1000 kJ. Octane: g for 5470 kJ, which is about 64.4 g per 1000 kJ. This is one reason natural gas is called the cleanest fossil fuel. It still makes CO₂, but less of it for each unit of heat.
Incomplete combustion
When the oxygen supply is limited, there is not enough oxygen to turn all the carbon into CO₂. This is incomplete combustion. The hydrogen still forms water, because hydrogen takes oxygen more readily. The carbon ends up partly as carbon monoxide, CO, or as solid carbon, called soot:
Real flames make a mixture of all three carbon products, depending on how much air reaches the flame. Glowing particles of soot are what make a flame yellow. A gas burner with its air hole open burns with a blue flame, because the combustion is nearly complete.
Incomplete combustion is dangerous. Carbon monoxide has no colour and no smell. It binds to haemoglobin, the oxygen carrier in red blood cells, about 200 to 250 times more strongly than oxygen does. Blood that holds carbon monoxide cannot carry oxygen. This is why a fuel must never be burned in a closed room, and why carbon monoxide alarms save lives. Soot is also harmful: tiny particles of it are breathed deep into the lungs.
Burning one mole of methane completely releases 890 kJ. Carbon monoxide burns to CO₂ with ΔHc⦵ = −283 kJ/mol. How much heat does one mole of methane release if it burns only to CO and water?
Use Hess's law. Burning methane to CO₂ in one step is the same as burning it to CO, then burning the CO to CO₂. So the heat for the first stage is kJ.
That is , about 68% of the full energy. Almost a third of the fuel's energy is left unused, locked in the carbon monoxide.
Check: . ✓ Incomplete combustion wastes fuel as well as making poison.
Substitution with chlorine: a chain reaction
Mix methane and chlorine in the dark at room temperature, and nothing happens. Shine ultraviolet light on the mixture, and a reaction starts. A hydrogen atom on the methane is replaced by a chlorine atom:
The product is chloromethane. Because one atom replaces another, this is a substitution reaction.
Why does light matter? The weakest bond in the mixture is Cl–Cl, at 242 kJ/mol. One photon of light can break one molecule's bond if it carries enough energy. Divide 242 kJ by the number of molecules in a mole, and each bond needs about J. Chlorine absorbs ultraviolet and violet light strongly, and those photons carry that much energy. Heat at several hundred degrees can also do the job.
When the Cl–Cl bond breaks this way, the two electrons of the bond are shared out: one to each chlorine atom. This is called homolytic fission. Each chlorine atom now has an unpaired electron. A particle with an unpaired electron is called a radical, written with a dot: Cl•. Radicals are very reactive, because the unpaired electron is ready to pair up with another electron. Step through what happens next.
Press Next to add one step. Read the reason before you go on.
The reaction happens in three stages. Each line gives a step and the reason for it.
- Initiation: Cl₂ → 2Cl•. (Ultraviolet light breaks the weakest bond, Cl–Cl, giving one electron to each atom.)
- Propagation 1: Cl• + CH₄ → CH₃• + HCl. (The chlorine radical takes a hydrogen atom and leaves a methyl radical.)
- Propagation 2: CH₃• + Cl₂ → CH₃Cl + Cl•. (The methyl radical takes a chlorine atom and releases a new chlorine radical.)
- The new Cl• repeats propagation 1, so the cycle runs again and again: a chain reaction.
- Termination: two radicals meet and pair up, for example Cl• + Cl• → Cl₂, CH₃• + Cl• → CH₃Cl, or CH₃• + CH₃• → C₂H₆. (No radical is left, so that chain stops.)
Overall: CH₄ + Cl₂ → CH₃Cl + HCl.
Look at the propagation steps again. Add them together, and the radicals cancel: they appear on both sides. What is left is the overall equation. The radicals are like workers who pass a job along and come back for the next one.
One termination step gives a clue that this mechanism is real. Two methyl radicals can join to make ethane, C₂H₆. Small amounts of ethane are indeed found in the products, although no step in the overall equation makes it.
The problem: a mixture
The chlorine radicals do not stop at methane. Once chloromethane has formed, a radical can take one of its hydrogen atoms too. That gives dichloromethane, CH₂Cl₂, then trichloromethane, CHCl₃, then tetrachloromethane, CCl₄. The result is a mixture.
This makes free-radical substitution a poor way to make one pure product. Chemists can push the mixture towards chloromethane by using a large excess of methane. Then a chlorine radical is far more likely to meet a methane molecule than a chloromethane molecule. With longer alkanes, there are also several different hydrogen atoms to replace, which gives isomers. The Pre-University lecture on radical halogenation explains which hydrogen atoms are replaced fastest.
Write the initiation, the two propagation steps and one termination step for the reaction of ethane, C₂H₆, with chlorine in ultraviolet light.
Initiation. Cl₂ → 2Cl•
Propagation 1. Cl• + C₂H₆ → C₂H₅• + HCl
Propagation 2. C₂H₅• + Cl₂ → C₂H₅Cl + Cl•
Termination (one of several). C₂H₅• + Cl• → C₂H₅Cl, or C₂H₅• + C₂H₅• → C₄H₁₀.
Check: adding the propagation steps gives C₂H₆ + Cl₂ → C₂H₅Cl + HCl, and the radicals cancel. ✓ The product is chloroethane.
Oxygen appears in both CO₂ and H₂O, so balance it last. Count the oxygen atoms on the right, then halve to get O₂. For octane, 16 + 9 = 25 oxygen atoms per molecule means 12.5 O₂, or 25 O₂ for two molecules. A rule to check with: an alkane CₙH₂ₙ₊₂ needs (3n + 1)/2 O₂.
Cl• is not Cl⁻. A chlorine radical is a neutral atom with seven outer electrons, one of them unpaired. A chloride ion has eight outer electrons and a negative charge. Homolytic fission gives one electron to each atom, so it makes radicals, not ions.
Every propagation step has a radical on each side. One goes in and a different one comes out. If a step you have written has radicals on only one side, it is an initiation or a termination step, not a propagation step.
Work each one on paper first. Open a hint only when you are stuck.
-
Write balanced equations, with state symbols, for butane, C₄H₁₀(g), burning (a) completely and (b) incompletely to carbon monoxide and water.
Hint 1
Balance carbon first, then hydrogen, then oxygen. Double everything if you get a half.
Hint 2
(a) 4 CO₂ and 5 H₂O need 13 oxygen atoms, which is 6.5 O₂. (b) 4 CO and 5 H₂O need 9 oxygen atoms.
Full answer
(a) 2C₄H₁₀(g) + 13O₂(g) → 8CO₂(g) + 10H₂O(l). (b) 2C₄H₁₀(g) + 9O₂(g) → 8CO(g) + 10H₂O(l). Check (a): O is 26 on each side. Check (b): O is 18 on each side, 8 + 10. ✓ The rule (3n + 1)/2 gives 6.5 for butane, which matches (a).
-
Hexane, C₆H₁₄ (M = 86.2 g/mol), burns completely. How many moles of O₂ does one mole need? What mass of CO₂ forms from 1.00 kg of hexane?
Hint 1
Use (3n + 1)/2 with n = 6.
Hint 2
Moles of hexane = 1000 ÷ 86.2. Each mole gives 6 mol of CO₂, each of mass 44.0 g.
Full answer
O₂: mol. Hexane: mol. CO₂: mol, and kg. Check: it is close to the 3.08 kg for octane, because both alkanes are mostly CH₂ units, and each CH₂ (14 g) makes one CO₂ (44 g), about 3.1 times its mass. ✓
-
Bromine reacts with methane in ultraviolet light in the same way as chlorine. Write the initiation step, the two propagation steps and two different termination steps. Name the main organic product.
Hint 1
Replace every Cl in the chlorine mechanism by Br.
Hint 2
Each propagation step has one radical on each side. Termination steps join two radicals.
Full answer
Initiation: Br₂ → 2Br•. Propagation: Br• + CH₄ → CH₃• + HBr, then CH₃• + Br₂ → CH₃Br + Br•. Termination, for example: Br• + Br• → Br₂, and CH₃• + CH₃• → C₂H₆ (or CH₃• + Br• → CH₃Br). The main product is bromomethane, CH₃Br. Check: the two propagation steps add to CH₄ + Br₂ → CH₃Br + HBr. ✓
-
Propane, CH₃CH₂CH₃, reacts with chlorine in ultraviolet light. (a) Draw or name the two different monochloro products. (b) If every hydrogen atom were equally likely to be replaced, in what ratio would they form? (c) The real mixture contains more 2-chloropropane than your answer to (b). What does this suggest?
Hint 1
Propane has hydrogen atoms on its end carbons and on its middle carbon. Replacing one from each kind gives a different isomer.
Hint 2
Count: 6 hydrogen atoms on the two end carbons, 2 on the middle carbon.
Full answer
(a) 1-chloropropane, CH₃CH₂CH₂Cl (H replaced on an end carbon), and 2-chloropropane, CH₃CHClCH₃ (H replaced on the middle carbon). (b) 6 : 2, which is 3 : 1 in favour of 1-chloropropane. (c) The hydrogen atoms on the middle carbon must be removed more easily than those on the ends. The hydrogen atoms are not all equal, which the Pre-University lecture on radical halogenation explains. Check: 6 + 2 = 8, the number of hydrogen atoms in C₃H₈. ✓
Radical chain reactions happen far beyond the laboratory. High in the atmosphere, ultraviolet light from the Sun breaks chlorine atoms off chlorofluorocarbons (CFCs), once used in fridges and sprays. Each chlorine radical can destroy many ozone molecules in a chain before it is removed. This is why the ozone layer thinned, and why countries agreed in the Montreal Protocol of 1987 to stop making CFCs.
Radicals also form inside living cells, and they can damage fats, proteins and DNA. Some molecules, such as vitamin E, can stop a radical chain by handing the radical a hydrogen atom. The new radical they form is too stable to carry the chain on, so it acts like a termination step. These molecules are called antioxidants. Whether taking extra antioxidants as tablets improves health is still debated. But the chemistry they rely on is the chemistry of this lecture: radicals, chains, and how a chain stops.
- Alkanes are saturated hydrocarbons, CₙH₂ₙ₊₂, with tetrahedral carbon atoms at 109.5°, so their chains are flexible zigzags.
- Alkanes are non-polar, with only London forces between molecules, so they have low boiling points and do not dissolve in water.
- Strong, almost non-polar C–C and C–H bonds make alkanes unreactive with most reagents, although their combustion releases a lot of energy.
- Complete combustion gives CO₂ and H₂O and needs (3n + 1)/2 O₂ per molecule, while incomplete combustion also gives toxic CO or soot and wastes energy.
- In ultraviolet light, a halogen substitutes for hydrogen by a radical chain: initiation, two propagation steps, and termination.
- Radical substitution gives a mixture of products, so it is a poor way to make one pure compound.