- Alkanes: structure, properties and combustion
- Alkenes: addition reactions
- Radical halogenation of alkanes · coming soon
Millions of compounds, and no way to learn them one by one
The first lecture in this topic showed that carbon forms an enormous number of compounds. Chemists have registered more than 200 million substances, and most of them contain carbon. Nobody could learn the properties of each one separately. If organic chemistry were a list, it would be impossible.
It is not a list. It is a set of families. Learn how one member of a family behaves, and you can predict the behaviour of members you have never met. This lecture is about those families, called homologous series. It also delivers what the earlier lectures left open: the general formulae, and the pattern of boiling points that you met with the pentanes.
One family, one step at a time
Write down the first four alkanes: CH₄, C₂H₆, C₃H₈, C₄H₁₀. Look at what changes from one to the next. Each formula has one more carbon and two more hydrogens than the one before. The difference is always CH₂.
The picture shows where that difference comes from. To make the next alkane, you put one more carbon into the chain. That carbon uses two of its four bonds to join the chain. It uses the other two to hold two hydrogens. So each step adds exactly one CH₂ unit.
A family built this way is called a homologous series. "Homologous" comes from a Greek word meaning "corresponding" or "in agreement", which suits a family whose members match each other step by step.
A homologous series is a family of organic compounds that:
- 1. have the same functional group, and so the same type of chemical reactions;
- 2. fit the same general formula;
- 3. differ from one member to the next by CH₂;
- 4. show a gradual change in physical properties, such as boiling point, as the chain gets longer.
Do not learn these four features as a list. Each one follows from the same picture: the same "working part" on a chain that grows one CH₂ at a time. The working part decides the reactions. The chain length decides how strongly the molecules attract each other.
Where the general formulae come from
A general formula gives the formula of every member, using for the number of carbon atoms. You can build each one by counting bonds. There is no need to memorise them.
Alkanes. Take a straight chain of carbons joined by single bonds. Each carbon has 4 bonds, so the chain has bond ends in total. The chain itself has carbon–carbon bonds, and each one uses 2 bond ends. Every bond end that is left holds a hydrogen:
So alkanes are . Check with propane: gives . ✓ This is the most hydrogen a carbon chain can hold, which is why alkanes are called saturated.
Alkenes. An alkene has one C=C double bond. A double bond uses two more bond ends than a single bond, so there are two fewer hydrogens: . The smallest alkene is ethene, , because a double bond needs two carbons. There is no alkene with one carbon. Alkenes are unsaturated: they could hold more hydrogen.
Alcohols. An alcohol is an alkane with one hydrogen replaced by −OH. Its general formula is , which is the same as . Ethanol is .
A compound has the formula C₄H₈. It fits the alkene general formula. Must it be an alkene?
Show the answer
No. A ring of four carbons, cyclobutane, also has the formula C₄H₈. Closing a chain into a ring makes one extra carbon–carbon bond, which removes two hydrogens, exactly as a double bond does. The last lecture called these functional group isomers: same formula, different family.
So a general formula tells you which families a compound could belong to. To be sure, you need the structure: is there a C=C, or a ring? The family is decided by the functional group, not by the formula.
Same reactions, because the working part is the same
Ethanol and butan-1-ol look different on paper. One has 2 carbons, the other 4. But they react in the same ways. Both burn. Both react with sodium to give hydrogen. Both can be oxidised. Why?
Because a reaction happens where the molecule is reactive, and that is the functional group. In an alcohol, the reactions happen at the −OH group. The chain is mostly a passenger. It changes the speed of a reaction a little, but not what kind of reaction happens. Since every alcohol has the same −OH group, every alcohol has the same family of reactions. All alkenes react at their C=C. All alkanes, which have no functional group, are unreactive in the same ways. The next topic studies these reactions one family at a time.
"The same reactions" is a strong pattern, not a law without exceptions. The first member of a family is sometimes different, because it has no chain at all. For example, most alcohols can lose a water molecule to form an alkene. Methanol cannot, because it has only one carbon, and a C=C needs two.
Different boiling points, because the chain is different
Physical properties are a different story. Here are the boiling points of the first ten straight-chain alkanes.
| n | Alkane | Formula | Boiling point / K | Boiling point / °C | Step from the one before / °C |
|---|---|---|---|---|---|
| 1 | methane | CH₄ | 111 | −162 | — |
| 2 | ethane | C₂H₆ | 184 | −89 | 73 |
| 3 | propane | C₃H₈ | 231 | −42 | 47 |
| 4 | butane | C₄H₁₀ | 273 | 0 | 42 |
| 5 | pentane | C₅H₁₂ | 309 | 36 | 36 |
| 6 | hexane | C₆H₁₄ | 342 | 69 | 33 |
| 7 | heptane | C₇H₁₆ | 371 | 98 | 29 |
| 8 | octane | C₈H₁₈ | 399 | 126 | 28 |
| 9 | nonane | C₉H₂₀ | 424 | 151 | 25 |
| 10 | decane | C₁₀H₂₂ | 447 | 174 | 23 |
Source: Chemistry LibreTexts, straight-chain alkane tables (values rounded; butane is −0.5 °C). Different books differ by a degree or so.
The boiling point rises with every CH₂. The reason is the one you met in the lecture on London dispersion forces. A longer molecule has more electrons, so its temporary dipoles are bigger. It also has more surface to touch its neighbours. Both make the attractions between molecules stronger. Stronger attractions need more energy to overcome, so the boiling point is higher.
Look at the last column. The steps are not equal. They shrink, from 73 °C between methane and ethane to 23 °C between nonane and decane. Each CH₂ adds about the same extra attraction, but to a molecule that already has more and more. So each step changes the total by a smaller and smaller share. That is why the trend is called gradual: smooth and predictable, but not a fixed number of degrees per step.
Use the graph below to compare three families.
Choose which families to show. Then move n to read each boiling point and the step from the member before. Compare the alcohols with the alkanes that have the same number of carbons.
Show:
The graph shows the boiling points of the straight-chain alkanes (n = 1 to 10), the alk-1-enes (n = 2 to 8) and the primary alcohols (n = 1 to 6).
| n | Alkane / °C | Alkene / °C | Alcohol / °C |
|---|---|---|---|
| 1 | −162 | — | 65 |
| 2 | −89 | −104 | 78 |
| 3 | −42 | −47 | 97 |
| 4 | 0 | −6 | 117 |
| 5 | 36 | 30 | 138 |
| 6 | 69 | 63 | 157 |
Three things should stand out. First, every family rises smoothly, for the same reason. Second, the alkenes sit just below the alkanes with the same number of carbons, because they have the same kind of attraction and two fewer electrons. Third, the alcohols sit far above. Methanol boils at 65 °C, while methane boils at −162 °C. The −OH group lets alcohol molecules form hydrogen bonds with each other, which are much stronger than London forces.
Now look at that gap as the chain grows. It is 227 °C for one carbon, 139 °C for three and 88 °C for six. Each alcohol molecule has one −OH group, whatever its length, so the hydrogen bonding stays about the same. But the London forces grow with every CH₂. In a long alcohol, the chain does more and more of the attracting, and the alcohol behaves more and more like an alkane. The same idea explains solubility. Methanol, ethanol and propan-1-ol mix with water in any amount, but hexan-1-ol dissolves only a little.
Worked examples
Give the molecular formula of (a) the alkane with 7 carbons, (b) the alkene with 5 carbons, (c) the alcohol with 4 carbons.
(a) with : , so , heptane.
(b) with : , pentene (for example pent-1-ene).
(c) with : , so , butanol (for example butan-1-ol).
Check (a) by counting bond ends: 7 carbons have 28; 6 C–C bonds use 12; 16 are left for hydrogen. ✓
An alkane has . Which alkane is it? (: C = 12, H = 1.)
Write the general . Each CH₂ unit has mass , and an alkane has two extra hydrogens, so .
It is , pentane (or one of its isomers, methylbutane or dimethylpropane, which have the same formula).
Check: . ✓ Notice that each member's is 14 more than the one before. That is the CH₂ step, seen as mass.
You know the boiling points of the alkanes up to octane (126 °C), and that the steps from hexane to heptane and heptane to octane were 29 °C and 28 °C. Predict the boiling point of nonane.
The steps are shrinking slowly: 33, 29, 28. A sensible next step is a little smaller, about 23 to 25 °C. So nonane should boil at about °C.
Check against the table: nonane boils at 151 °C. ✓ This is the power of a homologous series. You predicted a property of a compound you had not looked up, from the pattern of its family.
One more piece of working, with a common mistake in it. Find it.
Question: an alkene and an alkane each contain 12 hydrogen atoms. Find their formulae. Tap the line that contains the mistake.
The working below has one wrong line, line 4.
- Alkenes are CₙH₂ₙ. (Correct.)
- 2n = 12, so n = 6. (Correct.)
- The alkene is C₆H₁₂, hexene. (Correct.)
- Alkanes are CₙH₂ₙ₊₂, so 2n + 2 = 12 gives n = 6, and the alkane is C₆H₁₂. (Wrong: 2n = 10, so n = 5 and the alkane is C₅H₁₂, pentane. C₆H₁₂ cannot be an alkane, because hexane is C₆H₁₄.)
The general formula is an equation. Solve it each time for the family you are working with. The same number of hydrogens means a different number of carbons in each family.
C₄H₈ fits CₙH₂ₙ, but it could be an alkene or a ring (cyclobutane). C₂H₆O fits the alcohol formula, but it could also be methoxymethane, an ether. A general formula narrows the choice. The functional group decides the family.
The rise is gradual, not constant. For the alkanes the steps shrink from 73 °C to 23 °C over the first ten. Predict the next step from the nearby steps, not from the first one.
Chemical properties (which reactions happen) stay the same along a series, because the functional group is the same. Physical properties (boiling point, melting point, density, solubility in water) change gradually, because the chain changes. In an exam answer, say which kind you mean and give the reason.
Work each one on paper first. Open a hint only when you are stuck. Use : C = 12, H = 1, O = 16.
-
Write the names and molecular formulae of the two alcohols that come after propan-1-ol in the series of straight-chain alcohols with the −OH on the end carbon. Show that each fits the general formula.
Hint 1
Add one CH₂ each time, and keep the −OH on carbon 1.
Hint 2
Propan-1-ol is C₃H₇OH. The next has 4 carbons.
Full answer
Butan-1-ol, C₄H₉OH, and pentan-1-ol, C₅H₁₁OH. The general formula CₙH₂ₙ₊₁OH gives 2 × 4 + 1 = 9 and 2 × 5 + 1 = 11 hydrogens on the chain. ✓ Each differs from the one before by CH₂.
-
Which of these pairs are neighbouring members of the same homologous series? (a) CH₃OH and C₂H₅OH (b) C₂H₆ and C₃H₆ (c) C₄H₁₀ and C₅H₁₂ (d) C₂H₄ and C₂H₆
Hint 1
Neighbours differ by exactly CH₂ and have the same functional group.
Hint 2
Subtract the formulae in each pair. Then check which general formula each one fits.
Full answer
(a) Yes: both alcohols, differing by CH₂. (b) No: they differ by C only, and C₂H₆ is an alkane while C₃H₆ fits the alkene formula. (c) Yes: both alkanes, differing by CH₂. (d) No: they differ by H₂, and they are in different families (ethene and ethane). Check: in the two "yes" pairs, the second formula minus the first is exactly CH₂. ✓
-
An alkene has . Find its molecular formula. Then estimate its boiling point if it is the alk-1-ene, given pent-1-ene 30 °C and hept-1-ene 94 °C.
Hint 1
For CₙH₂ₙ, .
Hint 2
For the boiling point, the compound sits between the two given members.
Full answer
, so : C₆H₁₂, hexene. Hex-1-ene sits between pent-1-ene and hept-1-ene, so a first estimate is halfway: °C. The steps shrink slightly, so the true value should be a little above halfway. The measured value is 63 °C. Check: 6 × 12 + 12 × 1 = 84. ✓
-
Stretch. Compare each alcohol with the alkane that has the same number of carbons. The boiling-point gap is 227 °C for n = 1, 167 °C for n = 2, 139 °C for n = 3 and 88 °C for n = 6. Explain why the gap shrinks. Then predict which dissolves better in water, butan-1-ol or hexan-1-ol, and explain using the same idea.
Hint 1
How many −OH groups does each alcohol molecule have, whatever its length?
Hint 2
Which part of the molecule mixes well with water, and which part does not?
Full answer
Every alcohol molecule has exactly one −OH group, so its hydrogen bonding stays about the same as the chain grows. The London forces grow with every CH₂, in the alcohol and in the alkane alike. So the extra attraction from the −OH group becomes a smaller share of the total, and the alcohol's boiling point gets closer to the alkane's.
Butan-1-ol dissolves better. The −OH group can hydrogen bond with water, but the chain cannot. The longer the chain, the more of the molecule is like an alkane, which does not mix with water. Measured values agree: about 8 g of butan-1-ol dissolve in 100 g of water, but only about 0.6 g of hexan-1-ol. Check: both answers come from one idea, a fixed −OH group on a growing chain. ✓
The smooth rise in boiling point is what makes crude oil useful. Crude oil is a mixture of hundreds of hydrocarbons, mostly alkanes of many chain lengths. In a refinery it is heated, and its vapour rises up a tall column that is hot at the bottom and cooler at the top. Each compound condenses at the height where the column is just below its boiling point. Short chains rise to the top as gases. Longer chains, for petrol, kerosene and diesel, condense lower down. The longest chains never boil at all and are collected as thick oils and waxes. This is fractional distillation, and it works only because boiling point changes so predictably with chain length.
The deeper lesson is about how chemists think. Faced with millions of compounds, they do not memorise. They ask two questions. Which family is it in (the functional group)? How big is it (the chain)? The first answer predicts its reactions. The second predicts its physical properties. That is pattern recognition, applied to the whole of organic chemistry.
- A homologous series is a family of compounds with the same functional group and the same general formula, in which each member differs from the next by CH₂.
- The general formulae come from counting bonds: alkanes CₙH₂ₙ₊₂, alkenes CₙH₂ₙ, and alcohols CₙH₂ₙ₊₁OH.
- Members of a series have similar chemical properties because reactions happen at the functional group, which is the same in every member.
- Boiling points rise gradually with chain length because London forces grow with every CH₂, and the steps get smaller as the chain gets longer.
- Alcohols boil far higher than alkanes with the same number of carbons because of hydrogen bonding, but the gap narrows as the chain grows.
- A general formula alone cannot prove which family a compound belongs to, because isomers in other families can share it.