MathemagiciansLibraryExplorationsDeep Dives
← Physics · Upper Secondary
PhysicsUpper Secondary

Kinetic theory — assumptions of the model

PU5 — Thermal Physics › PU5.1 — Ideal Gas and Kinetic TheoryLecture 1 of 4~2700 words

Too many particles to follow

One litre of air in your room holds about molecules. Each one moves at hundreds of metres per second, in its own direction.

Suppose you tried to write down where each molecule is, one molecule per second. You would need about years for that one litre. That is tens of thousands of times the age of the universe.

So following each particle is hopeless. And yet the air in a tyre behaves in a completely predictable way. Pump it harder and the pressure rises by an amount you can calculate. Heat a sealed can and the pressure rises by an amount you can calculate. How can something so disordered be so predictable?

The answer is that we do not need to follow each particle. We need a good model of what the particles are doing, and then we need only averages. That model is the kinetic theory of gases. "Kinetic" means "to do with motion".

A model, not a photograph

A model is a simplified picture that keeps what matters and drops what does not. A map does not show every tree, and that is what makes it useful. The kinetic theory does the same with a gas. It makes a short list of assumptions about the particles. Each assumption is not perfectly true. But for most gases, in most everyday conditions, each one is very nearly true, and the predictions that follow are excellent.

A gas that obeys every assumption exactly is called an ideal gas. No real gas is ideal. Air at room conditions comes very close.

The assumptions of the kinetic theory (an ideal gas)

1. A gas is made of a very large number of particles (atoms or molecules) in constant, random motion.

2. The volume of the particles themselves is negligible compared with the volume of the container.

3. The particles exert no forces on each other, or on the walls, except when they collide.

4. All collisions are elastic: no kinetic energy is lost.

5. A collision lasts a negligible time compared with the time between collisions.

6. Between collisions, each particle moves in a straight line at constant speed, obeying Newton's laws.

Do not learn these as six separate facts. Each one has a reason, and each one can be checked. Go through them one at a time.

Checking each assumption against real air

1. Many particles, moving randomly. "Random" means there is no preferred direction. At any moment, as many particles are moving left as right, and as many up as down. This is why a gas pushes equally on every wall of its container. "Very large" matters too. With particles, the averages are extremely steady, even though each particle is unpredictable. A single coin toss is unpredictable. The fraction of heads in a billion tosses is not.

2. The particles take up almost no room. This is the one that surprises people, so check it with numbers. In air at room conditions, each molecule has, on average, a little cube of space about 3.4 nm wide to itself. A nitrogen molecule is about 0.36 nm across. (Sources: the spacing follows from the number of molecules in a cubic metre at room conditions; the nitrogen size is its kinetic diameter, 364 pm, Wikipedia "Kinetic diameter".)

3.4 nm
Air at room conditions, drawn to scale. Each square is 3.4 nm wide, the average space one molecule has to itself. Each dot is a molecule about 0.36 nm across. The molecules themselves fill well under 1% of the space.

The molecules are about nine and a half of their own widths apart. Worked Example 1 shows that they fill less than one part in a thousand of the volume. A gas is mostly empty space. That is why a gas can be squashed so easily and a liquid cannot.

3. No forces except in collisions. Real molecules do attract each other slightly. These weak attractions are what make a gas turn into a liquid when it is cooled enough. But the attractions only act over short distances, about the size of a molecule or two. Gas molecules spend almost all their time far apart, so the attractions hardly ever act.

4. Collisions are elastic. Think about what would happen if they were not. Every collision would turn a little kinetic energy into something else. A sealed, perfectly insulated bottle of gas would then slowly cool down by itself, and its pressure would fall. That never happens. (Molecules can swap some energy with their own spinning motion in a collision. But averaged over the whole gas, no kinetic energy is lost.)

5. Collisions are quick. A collision is over in the time a molecule takes to move about its own width. Between collisions, a molecule in air travels about 68 nm, roughly 190 times its own width.

6. Straight lines between collisions. With no forces acting (assumption 3), Newton's first law says each particle keeps moving in a straight line at constant speed.

Stop and think

Nitrogen molecules at room temperature move at about 500 m/s, faster than a passenger jet. So why does the smell of food take many seconds, even minutes, to reach you from across a room?

Show the answer

Because each molecule does not travel in one straight line across the room. It travels about 68 nm, hits another molecule, and sets off in a new direction. At about 500 m/s, that happens several billion times every second. So the molecule zigzags randomly, and its overall progress in any one direction is very slow. In still air, smells spread mainly by this slow random spreading, called diffusion, and much faster by air currents. Fast molecules and slow spreading are both part of the same model.

Where pressure comes from

Now use the model. Where does a gas's push on its walls come from?

Follow one molecule as it hits a wall. Suppose its velocity towards the wall is . The collision is elastic, so it bounces back with the same speed: its velocity across is now . Its momentum across has changed from to , a change of size .

wallbefore: +uafter: −upushon wallsize of momentum change = 2mu
One molecule bouncing off a wall. Only the part of its velocity towards the wall reverses. The part along the wall is unchanged. The molecule's momentum changes by 2mu away from the wall, so the wall receives a push of the same size into the wall.

The impulse lecture showed that a change in momentum needs a force: force = change in momentum ÷ time. The wall pushes the molecule back, and by Newton's third law the molecule pushes the wall with an equal force in the opposite direction. One molecule gives a tiny tap. But an enormous number of molecules hit every square centimetre of wall every second. Their taps merge into a steady push. Pressure is that push divided by the area of the wall.

That is it. That is the whole idea. Pressure is the total effect of countless tiny collisions with the walls.

From here, two predictions follow at once. If the gas is squashed into a smaller volume, each molecule reaches a wall more often, so there are more taps per second, and the pressure rises. If the gas is heated, the molecules move faster. Then two things change: each tap is harder, because is bigger, and the taps come more often, because each molecule crosses the box sooner. Both raise the pressure. The next lecture turns these two ideas into the gas laws, with numbers.

See both effects in the box below.

Simulation — a gas in a box

Press Play. Then change the temperature or the volume, and watch the hits on the right-hand wall and the pressure. Each change restarts the measurement. Give it a few seconds to settle.

This table shows what the simulation measures after about 20 seconds of running, for 60 particles. Pressures are compared with the starting box at 300 K.

TVolumeHits per secondPressure: measured (predicted)
300 K100%≈ 11× 1.0 (1.00)
600 K100%≈ 16× 2.0 (2.00)
300 K50%≈ 22× 2.0 (2.00)
150 K50%≈ 16× 1.0 (1.00)
600 K40%≈ 39× 5.0 (5.00)

Doubling the temperature makes each hit about 1.41 times harder and the hits about 1.41 times more frequent, so the pressure doubles. Halving the volume doubles the hits per second and leaves each hit the same, so the pressure doubles again.

You should have seen that the measured pressure wobbles at first and then settles close to the prediction. Doubling the temperature makes both the hits per second and the push per hit about 1.41 times bigger, and . Halving the volume doubles the hits per second, but it leaves the push per hit unchanged.

What temperature measures

The model has one more link to make. Heating a gas makes its particles move faster. Kinetic theory makes this precise:

Temperature in kinetic theory

The average kinetic energy of the particles of an ideal gas is proportional to its absolute temperature , in kelvin.

Some books list this as a seventh assumption. It is better to see it as a result. When the model's pressure is compared with the pressure measured in experiments, this link is what makes the two agree. A later lecture, Pressure from molecular motion, does that comparison step by step. For now, take it as the bridge between the particles and the thermometer.

Notice the word absolute. The link works with kelvin, not degrees Celsius. At 0 °C the particles are still moving fast. The kelvin scale starts at absolute zero, 0 K or −273 °C, the temperature at which the average kinetic energy of the particles would reach its lowest possible value. To change Celsius to kelvin, add 273.

For nitrogen at 300 K, the average kinetic energy of one molecule is about J.

Here is the subtle part. If the temperature doubles, the average kinetic energy doubles. Does the speed double too? Commit to an answer first.

Predict — what happens to the speed?

Nitrogen is heated from 300 K to 600 K. What happens to the typical speed of its molecules? Choose before you read on.

The question: nitrogen is heated from 300 K to 600 K. What happens to the typical speed of its molecules? Answer: it is multiplied by √2 ≈ 1.41. The average kinetic energy doubles, and kinetic energy depends on the speed squared, so the speed squared doubles.

The speed goes up by , not 2, because kinetic energy depends on the speed squared. Speed is proportional to .

Worked examples

Worked Example 1 — Is the volume of the molecules really negligible?

Air at 300 K and atmospheric pressure has about molecules in each cubic metre. A nitrogen molecule is about m across. Find the average spacing between molecules, and the fraction of the space that the molecules fill.

Think first. If each molecule has its own small cube, the cube's volume is 1 m³ shared by all the molecules.

Volume per molecule m³. The side of that cube is the cube root: about m, or 3.4 nm.

Treat a molecule as a small sphere of diameter 0.36 nm. Its volume is m³. The fraction filled is , about 0.06%.

Check. The spacing is about 9.5 molecule widths, and . A sphere fills about half of its own cube (), so 0.0006 fits. ✓ Assumption 2 is very good for air.

Worked Example 2 — Doubling the temperature

Nitrogen at 300 K has an average kinetic energy per molecule of about J, and a typical molecular speed of about 520 m/s. The gas is heated to 600 K. Find the new average kinetic energy and the new typical speed.

Think first. Kinetic energy follows . Speed follows .

doubles, so the average kinetic energy doubles: J.

and does not change, so doubles. The speed is multiplied by : about m/s.

Check. , about 2 after rounding. ✓ The speed rose by about 41%, not 100%.

Worked Example 3 — A warm day, in kelvin

The air in a room warms from 20 °C to 40 °C. A student says the average kinetic energy of the molecules has doubled. Is this right? By what factor does it really change, and by what factor does the typical speed change?

Think first. Convert to kelvin before you compare.

20 °C = 293 K and 40 °C = 313 K. The ratio is . So the average kinetic energy rises by about 6.8%, not 100%. The typical speed rises by , about 3.4%.

Check. Doubling the average kinetic energy would need 586 K, which is 313 °C. ✓ The Celsius numbers doubled only because the Celsius scale starts at an arbitrary point, the freezing point of water.

Worked Example 4 — How many taps make a pressure?

Atmospheric pressure is about 101 000 Pa, so it pushes about 10.1 N on each square centimetre. A nitrogen molecule has mass kg. As a rough estimate, suppose every molecule hits the wall head-on at 500 m/s. How many hits per second on 1 cm² would give a push of 10.1 N?

Think first. Each hit gives a change in momentum of . Force = change in momentum per second.

One hit: kg m/s.

Hits per second needed .

Check. More than hits on one square centimetre, every second. That is why the push feels perfectly steady, even though it is made of separate taps. ✓ (Real molecules hit at all angles and speeds. The careful average, done in a later lecture, gives the same size of answer.)

Where the model breaks down

The assumptions fail when the particles are pushed close together, or when they move slowly.

At very high pressure, the molecules are squeezed close. At about 200 times atmospheric pressure, the molecules in Worked Example 1 would fill roughly a tenth of the space, so assumption 2 is no longer good. At low temperature, the molecules move slowly, so the weak attractions have time to act as they pass. Assumption 3 fails, and the gas eventually turns into a liquid. This is why real gases behave most like an ideal gas at low pressure and high temperature. In 1873 Johannes van der Waals adjusted the model to allow for both effects, and the weak attractions between molecules are still called van der Waals forces.

Three traps

Trap 1 — Using degrees Celsius

Average kinetic energy is proportional to temperature in kelvin. Going from 10 °C to 20 °C does not double anything. Always convert to kelvin first by adding 273.

Trap 2 — Speed proportional to temperature

Kinetic energy is proportional to . Speed is proportional to . To double the speed of the molecules, you must multiply the absolute temperature by 4.

Trap 3 — Pressure from particles hitting each other

Pressure on a wall comes from particles hitting the wall. Collisions between particles happen, but they do not create the push on the wall. They only share kinetic energy among the particles.

Try it yourself

Work each one on paper first. Open a hint only when you are stuck.

  1. Which assumption of the kinetic theory fails most clearly in each case? (a) Air squeezed to 300 times atmospheric pressure in a diving cylinder. (b) Steam cooled close to 100 °C, where it starts to condense on a cold window. (c) A "gas" made of only five molecules in a box.

    Hint 1

    For each, ask what is unusual: the spacing, the speed, or the number?

    Hint 2

    Condensing means the molecules are sticking together. What does that need?

    Full answer

    (a) Assumption 2: the molecules are squeezed close, so their own volume is no longer negligible. (b) Assumption 3: the molecules are slow enough for their attractions to hold them together. (c) Assumption 1: with five molecules, there are too few for averages to be steady, so the push on a wall comes in irregular bursts. Check: each failure matches the one condition that is unusual. ✓

  2. A gas is heated from 27 °C to 127 °C. By what factor does the average kinetic energy of its particles change? By what factor does their typical speed change?

    Hint 1

    Change both temperatures to kelvin.

    Hint 2

    The speed factor is the square root of the energy factor.

    Full answer

    27 °C = 300 K and 127 °C = 400 K. The average kinetic energy changes by . The typical speed changes by . Check: . ✓ The Celsius temperature went up almost 5 times, but the energy rose by only a third.

  3. A balloon holds a mixture of helium atoms (mass 4 units) and nitrogen molecules (mass 28 units) at the same temperature. (a) Which particles have the larger average kinetic energy? (b) How many times faster is a typical helium atom than a typical nitrogen molecule?

    Hint 1

    The average kinetic energy depends only on the temperature.

    Hint 2

    Same , so is inversely proportional to .

    Full answer

    (a) Neither. At the same temperature, the average kinetic energy is the same for both. (b) , so and . Check: the lighter particle must move faster to carry the same energy. ✓ This is one reason helium leaks out of a balloon faster than air does.

  4. A stretch. Use the numbers from Worked Example 1 (at 1 atmosphere: spacing 3.4 nm, molecules filling about 0.06% of the space). The gas is compressed to 200 atmospheres at the same temperature. Assume, for this estimate, that the number of molecules per cubic metre rises 200 times. (a) What fraction of the space do the molecules now fill? (b) How far apart are they, in molecule widths? (c) Is assumption 2 still good?

    Hint 1

    The fraction filled is proportional to the number of molecules per cubic metre.

    Hint 2

    The spacing is the cube root of the volume per molecule, so it shrinks by .

    Full answer

    (a) . (b) , so the spacing becomes nm, only about 1.6 molecule widths. (c) No. The molecules fill about an eighth of the space and are nearly touching, so the ideal-gas predictions start to go wrong. In fact, real nitrogen at this pressure does depart noticeably from ideal behaviour. Check: . ✓

The bigger idea

When kinetic theory was being built in the 1800s, many scientists still doubted that atoms were real. The strongest evidence came from something you can see under a microscope. In 1827 the botanist Robert Brown noticed that tiny particles from pollen, floating in water, jiggled constantly and at random. In 1905 Albert Einstein explained the jiggling: the particle is being hit unevenly from all sides by water molecules too small to see. In 1908 Jean Perrin measured the wandering, found that it matched Einstein's prediction, and used it to count molecules. He received the Nobel Prize in Physics in 1926. (Sources: Nobel Prize citation; Wikipedia, "Brownian motion".)

This is the pattern of the whole topic. A model of invisible particles, used with averages, predicts things you can measure: pressure, temperature, and the wandering of a speck of pollen. A thermometer is, in a real sense, measuring how fast the molecules around it are moving.

Key concepts in this lesson