MathemagiciansLibraryExplorationsDeep Dives
← Mathematics · Upper Secondary
MathematicsUpper Secondary

Similar shapes — area and volume scale factors

U3 — Geometry Advanced › U3.5 — Mensuration AdvancedLecture 4 of 4~2700 words

Twenty times smaller, and four hundred times smaller

A model car is built to a scale of 1 : 20. This means that every length on the model is one twentieth of the matching length on the real car. The real car is about 4.5 m long, so the model is about 22.5 cm long.

The outside of the real car has an area of 12 m². How much surface does the model have to paint?

Most people divide by 20 and get 0.6 m². Picture that. 0.6 m² is 6000 cm², a square about 77 cm wide. It is bigger than a desk, and it is supposed to wrap a toy that fits in your hand. Something is wrong.

The model's true surface is 0.03 m², which is 300 cm². That is not 20 times smaller than the real car. It is 400 times smaller. This lecture explains where the 400 comes from. Once you see it, you will also see why a big animal needs thick legs, and why a mouse has to eat all day.

What "similar" means

Two shapes are similar when one is an exact scaled copy of the other. Every length in the copy is the matching length in the original multiplied by the same number. That number is called the linear scale factor, and we call it . Some books call it the length scale factor.

When is bigger than 1, the copy is an enlargement. When is between 0 and 1, the copy is smaller. For the model car, going from the real car to the model, .

"Every length" means every length: for two similar cones, the radius, the height, the slant height and the distance round the base. All of them are multiplied by the same . The angles do not change, because a scaled copy has the same shape.

This is also the test for similarity. A cylinder of radius 3 cm and height 10 cm and a cylinder of radius 6 cm and height 15 cm are not similar. The radius has doubled, but the height has only gone up by a factor of 1.5. On the other hand, every circle is similar to every other circle, and every sphere to every other sphere. They have only one length each, so they cannot change shape.

Areas: every square becomes a block of squares

Start with a rectangle 3 cm by 2 cm. Enlarge it with . The new rectangle is 9 cm by 6 cm.

The old area is cm². The new area is cm². That is 9 times as much, not 3 times. The reason is that an area is one length times another length. Both lengths were multiplied by 3, so the area was multiplied by .

The same thing happens for every flat shape, even one with no formula. Cover the shape with small squares, like tiles on a floor. Now enlarge the whole picture with scale factor . Each small square becomes a square times as wide and times as tall. So each square becomes a block of squares of the original size. Every tile does the same thing. So the whole area is multiplied by .

3 squaressmall3 × 9 = 27 squaresevery length × 3
Enlarge an L-shape made of 3 unit squares with scale factor 3. Each square becomes a 3 by 3 block of 9 squares. So the area becomes squares, which is times as much.

For a shape with curved edges, the tiles do not fit perfectly at the edge. Use smaller and smaller tiles. The gaps shrink, and the result stays exactly the same.

The first lecture in this topic made a promise here. A sector with radius 5 cm had its radius doubled to 10 cm, keeping the angle. The arc doubled, but the area became four times as big. That lecture said that a later lecture would build on this fact. Here it is. Doubling the radius is an enlargement with . The arc is a length, so it is multiplied by 2. The area is an area, so it is multiplied by . The sector was not special. Every flat shape does this.

Stop and think

A round pizza has diameter 30 cm. A smaller one, with the same thickness, has diameter 20 cm. The big one is 1.5 times as wide. Is it 1.5 times as much pizza?

Show the answer

No. The two circles are similar, with . The amount of pizza depends on the area of the top, so it is multiplied by . The big pizza is more than twice as much food.

Check with the formula: and , and . ✓

Volumes: every cube becomes a block of cubes

Now go up one dimension. Fill a solid with small cubes. Enlarge it with scale factor . Each small cube becomes a cube times as wide, times as deep and times as tall. So each one becomes a block of small cubes.

Build it yourself in the explorer below. Watch three things grow at three different speeds: an edge, a face and the whole cube.

Explore — enlarge a cube

The small cube on the left has edge 1 cm. Change the scale factor k. The large cube has edge k cm, and it is built from small cubes. Compare how fast the edge, a face and the volume grow.

The picture shows a cube of edge 1 cm beside a cube of edge 3 cm. Each face of the large cube shows 9 small squares, and the large cube is built from 27 small cubes. The table shows the same counts for scale factors 1 to 5.

1 cube27 cubes
Scale factor Edge (cm)One face (cm²)Volume (cm³)Surface for each cm³ (cm²)
11116
22483
339272
4416641.5
55251251.2

The edge grows like : 2, 3, 4, 5. A face grows like : 4, 9, 16, 25. The volume grows like : 8, 27, 64, 125. At , the edge is 5 times as long, but the cube holds 125 times as much.

The last lecture gave a second way to see this, using slices. It ended with a hint: when every length is multiplied by , each slice's area is multiplied by . Cut both solids into the same number of thin slices. Each slice of the large solid has times the area of the matching small slice. It is also times as thick, because the height has been multiplied by . So each slice has times the volume. Every slice does the same, so the whole solid does too.

That is it. That is the whole idea. A length has one direction, an area has two, and a volume has three. Each direction is stretched by , so you multiply by once for each direction.

Similar shapes

If two shapes are similar with linear scale factor , then

every length is multiplied by ,

every area is multiplied by (the area scale factor),

every volume is multiplied by (the volume scale factor).

Which power? Ask what the quantity measures

The skill is choosing the right line. A question rarely says "area" or "volume". It says "paint", "water" or "mass". So before you calculate, ask: is this quantity a length, an area or a volume?

Paint covers a surface, so it is an area. Water fills a space, so it is a volume. The mass of a solid made of one material follows the volume, because every cubic centimetre has the same mass. Sort the cards below.

Sort — multiply by k, k² or k³?

Each card describes a pair of similar objects with linear scale factor k. Put each card in the box for what you multiply by. Read the reason on each card.

Each case below compares two similar objects with linear scale factor .

QuantityMultiply byBecause it is
The height of a model towera length
The distance round the edge of a photoa length (a perimeter)
The radius of the base of a larger conea length
The paint needed for a larger statuean area (the outside surface)
The fabric needed for a larger tentan area
The floor tiles for a larger room of the same shapean area (the floor)
The water a larger tank holdsa volume (capacity)
The mass of a solid metal statuea volume times a fixed density
The time to fill a larger tank from the same tapproportional to the volume

Notice the filling time. Time is not a volume. But the same tap gives the same water each minute, so the time follows the volume. A quantity that is proportional to an area or a volume takes that scale factor.

Going backwards: roots undo powers

Many questions give you two areas, or two volumes, and ask for something else. The method is always the same: get back to first.

If you know the area scale factor, then is that number, so is its square root. If you know the volume scale factor, then is that number, so is its cube root.

This is how you move from an area to a volume: area scale factor → square root → → cube → volume scale factor. Never jump straight from an area to a volume. Always go through .

Worked Example 1 — From heights to volume

Two similar cones have heights 5 cm and 15 cm. The smaller cone has volume 40 cm³. Find the volume of the larger cone.

Find . Heights are lengths, so .

Choose the power. Volume, so multiply by .

Answer. cm³.

Check: the large cone is 3 times as tall, 3 times as wide and 3 times as deep. Each of those multiplies the volume by 3, and . ✓

Worked Example 2 — From areas to perimeters

Two similar triangles have areas 18 cm² and 50 cm². Find the ratio of their perimeters.

Area scale factor. .

Back to . . The square root of a fraction is the root of the top over the root of the bottom.

Choose the power. A perimeter is a length, so it is multiplied by . The perimeters are in the ratio .

Check: , and . ✓

Worked Example 3 — The model car

Back to the opening question. The scale is 1 : 20 and the real car's surface is 12 m². Find the model's surface.

Find . From the real car to the model, .

Choose the power. Surface is an area, so multiply by .

Answer. m², which is 300 cm².

Check: 300 cm² is about the area of a square 17 cm wide. That could wrap a model 22.5 cm long. The wrong answer, 0.6 m², could not. ✓

Worked Example 4 — From volumes to a radius and a surface

Two similar cylinders have volumes 270 cm³ and 10 000 cm³. The smaller one has radius 3 cm. Find the radius of the larger one, and the ratio of their surface areas.

Volume scale factor. .

Back to . , because and .

Radius. A length: cm.

Surfaces. An area: . The surface areas are in the ratio .

The route went from a volume to , and then from to an area.

Check: , and . ✓

The frustum from the last lecture, in one line

The last lecture cut a small cone (radius 4 cm, height 6 cm) from a cone of radius 10 cm and height 15 cm. It worked out both cones in full.

R = 10r = 4H = 15h = 69
The small cone (dashed) is a scaled copy of the whole cone with . The frustum is what is left.

Now look at it again. The small cone and the whole cone are similar, with . So the small cone's volume is of the whole cone's. The whole cone is cm³. So the small cone is , exactly what the last lecture found.

The frustum is of the whole cone, which is cm³: the same answer, in one line. The cut is 40% of the way down from the tip, but it removes only 6.4% of the volume. Most of a cone's volume is near its base.

Stop and think

There are 100 cm in 1 m. How many cm² are there in 1 m²? How many cm³ are there in 1 m³?

Show the answer

A square 1 m wide is a square 100 cm wide. Changing the unit is like an enlargement with : the same square, measured with a ruler 100 times finer. So an area is multiplied by , and 1 m² = 10 000 cm². A volume is multiplied by , and 1 m³ = 1 000 000 cm³.

This is why 0.03 m² became 300 cm² in Worked Example 3. Using 100 for areas is the same trap as this lecture's hook.

Trap 1 — Using k for an area or a volume

The scale is 1 : 20, so it is tempting to divide every answer by 20. That is right only for lengths. For an area, divide by . For a volume or a mass, divide by . Write down first, then ask whether the question wants a length, an area or a volume.

Trap 2 — Jumping from area to volume without k

Given an area scale factor of 4, some students cube 4 to get 64 for the volume. But means , and the volume scale factor is . Always take the root first to get back to .

Trap 3 — Shapes that are not similar

The rules work only when every length is multiplied by the same . Two jars that "look alike" may not be similar. And a hollow model of a solid statue is not the same material all through, so its mass does not follow . Check that every pair of matching lengths gives the same before you use or .

Try it yourself

Work each one on paper first. Open a hint only when you are stuck.

  1. Two similar bottles have heights 12 cm and 18 cm. The small bottle holds 400 ml and has a label of area 60 cm². Find the capacity of the large bottle and the area of its label.

    Hint 1

    Find from the heights. Then decide which quantity is a volume and which is an area.

    Hint 2

    . Capacity uses ; the label uses .

    Full answer

    . Capacity: ml. Label: cm². Check: the capacity went up by more than the label, as it must, because when . ✓

  2. Two similar solids have surface areas 80 cm² and 180 cm². The larger solid has volume 540 cm³. Find the volume of the smaller solid.

    Hint 1

    Go from the areas back to . Do not use the area ratio on the volume.

    Hint 2

    , so from the small solid to the large one.

    Full answer

    , so and . The large volume is 3.375 times the small one, so the small volume is cm³. Check: . ✓

  3. A solid bronze statue is 2.4 m tall and has mass 1500 kg. A solid model, made of the same bronze, is 30 cm tall. Find the mass of the model. Polishing the statue's surface uses 3 litres of polish. How much polish does the model need?

    Hint 1

    Use the same unit for both heights first.

    Hint 2

    . Mass follows ; polish follows .

    Full answer

    . Mass: kg (3 s.f.). Polish: litres litres, which is about 47 ml. Check: the model is 8 times shorter, 64 times less surface and 512 times lighter. The mass falls fastest. ✓ This works because both are solid and of the same metal. Most large statues are hollow, so a real one would be much lighter.

  4. A drinking glass is shaped like a cone with its point at the bottom. You fill it with water to half its height. What fraction of the glass is full? How high, as a fraction of the height, must you fill it to hold half the glass's volume?

    Hint 1

    The water forms a smaller cone. Is it similar to the whole glass? What is ?

    Hint 2

    For the second part, the volume scale factor is . Go back to with a cube root.

    Full answer

    The water is a cone with its point at the same place, and its top surface is parallel to the rim. So it is similar to the whole glass, with . Its volume is of the glass. Half the height holds only one eighth.

    For half the volume, , so . You must fill it to about 79% of its height. Check: . ✓ This is the frustum idea again: most of the volume is near the wide end.

The bigger idea

Go back to the explorer. As the cube grew, the surface for each cm³ of volume fell: 6, 3, 2, 1.5, 1.2. In general it is . Large things have little surface for their volume. Small things have a lot. This is called the square–cube law, and it shapes the living world.

Galileo explained it in 1638, in his book Two New Sciences. The strength of a bone depends on the area of its cross-section, so it grows like . The weight it carries depends on the volume of the animal, so it grows like . Make an animal 10 times larger in every direction. Its bones become 100 times stronger, but its body becomes 1000 times heavier. So a large animal cannot be a scaled copy of a small one. Its legs must be thicker than the scaling gives, which is what you see in an elephant compared with a deer.

The biologist J. B. S. Haldane followed the same idea in 1926, in an essay called "On Being the Right Size". He noted that 5000 mice weigh about as much as one person, but have about 17 times the surface. You can check this. If a mouse were a perfectly similar small copy of a person, then , so . Each mouse has of the person's surface, and . A body loses heat through its skin, so a mouse must eat a great deal every day to stay warm.

The same law works in chemistry. Crushed into fine grains, a sugar cube has far more surface for the same amount of sugar. So powders dissolve and react faster than lumps.

Key concepts in this lesson