- Vector addition and subtraction
- What is a vector
- Enlargement · coming soon
- Position vectors and midpoints
- Using vectors to prove geometric results
- Displacement, velocity and acceleration as vectors · coming soon
Two paths that look parallel
Here is a question your eyes cannot answer.
The figure shows two straight paths on squared paper. Path 1 goes 12 squares across for every 7 up. Path 2 goes 10 across for every 6 up. Are they parallel?
They look parallel, even with a ruler. But a drawing is only as accurate as your pencil. You need a test that does not depend on how carefully anyone drew.
The last lecture asked what happens when you add a vector to itself, , and what that says about parallel lines. And it promised to explain why the minus sign in is the right symbol for the opposite vector. Both answers come from one idea: multiplying a vector by an ordinary number. Here it is.
Adding a vector to itself
Start with . Do , and then do again, tip to tail. The second arrow starts where the first one ends, and it points the same way. So the two arrows make one straight arrow, in the same direction, twice as long.
The columns say the same thing. Add top with top and bottom with bottom:
With numbers, is written . With vectors, is written . In the same way, . Look at the numbers. Every component has been multiplied by 2, or by 3.
Now a harder question. What should mean? Half of something is the thing that, added to itself, gives the whole. So should be the vector that, done twice, gives . That vector is , because . Again, every component is multiplied by the same number, .
An ordinary number used in this way is called a scalar. The word comes from "scale", because the number scales the arrow: it makes it longer or shorter. It is the same "scalar" as in the first vectors lecture: a size with no direction.
To multiply a vector by a number , multiply each component by :
When is positive, points the same way as and is times as long.
Why exactly times as long? Use Pythagoras on the new components:
The last step uses , which is true when is positive. Check it with the example: , and . Twice as long. ✓
The direction does not change, because multiplying both components by the same positive number keeps their ratio. still goes 3 across for every 2 up.
Negative numbers turn the arrow round
Now try . Multiply each component by :
Every sign is reversed: same length, opposite direction. That is exactly the opposite vector from the last lecture. So the symbol was never just a label. It means .
Here is the check that the symbol is right. With numbers, . With vectors, . A movement followed by its opposite leaves you where you started, just as a number plus its negative gives zero. So the minus sign behaves exactly as you expect.
Other negative numbers combine the two effects. is : turn the arrow round, then double it. In columns, . A negative scalar always does two jobs at once. Its sign reverses the direction. Its size scales the length.
So the length of is the size of , without its sign, times the length of :
Here means the size of the number with its sign removed, so . It is called the absolute value of . Some books call it the modulus.
One more case. When , , the zero vector, with length 0. So a length is never negative, but it can be zero.
Is shorter than ? After all, is less than 1.
Show the answer
No. is three times as long as . The minus sign only turns the arrow round. The length comes from the size of the number, . With , , and its length is . Length is a size, and a size has no sign.
Try it below. Choose , change , and watch the length, the direction and the dotted line.
Choose a vector a. Then change k with the slider or the buttons. The grey arrow is a. The thick arrow is ka. Both start at O.
Vector a:
This table keeps a = 3 right, 2 up, whose length is √13 ≈ 3.61, and tries five values of k.
| k | ka | Length | Direction |
|---|---|---|---|
| 2 | 6 right, 4 up | 2√13 ≈ 7.21 | same as a |
| ½ | 1.5 right, 1 up | ½√13 ≈ 1.80 | same as a |
| 0 | no movement | 0 | none |
| −1 | 3 left, 2 down | √13 ≈ 3.61 | opposite |
| −1½ | 4.5 left, 3 down | 1½√13 ≈ 5.41 | opposite |
In every row the length is |k| times √13. Every non-zero multiple lies along one straight line through the start of a.
You should have seen three things. A positive keeps the direction and a negative reverses it. The length is always times . And the thick arrow never leaves the dotted line: every multiple of lies along the same line. That last fact is the key to parallel lines.
A test for parallel vectors
Two vectors are parallel when they point in the same direction or in exactly opposite directions. Their lengths can be different. The explorer showed that is always parallel to , for any number except 0.
The reverse is also true, and it is the important part. If two non-zero vectors point the same way, the longer one is a stretched copy of the shorter one: a positive multiple. If they point opposite ways, turn one round first, and it becomes a negative multiple.
Two non-zero vectors and are parallel exactly when for some number .
If is positive, they point the same way. If is negative, they point opposite ways. The size of tells you how many times as long is.
That is it. That is the whole idea. "Parallel" means "a multiple of".
So the test is this. Find the that turns the top component of one vector into the top component of the other. Then check that the same works for the bottom components. If it does not, no single number works, and they are not parallel.
Now return to the two paths. One step of Path 1 is and one step of Path 2 is . For the top numbers, , so . For the bottom numbers, the same would give . But the bottom number of Path 2 is 6, not 5.83. No single number turns one step into the other. The paths are not parallel. Extended far enough, they cross.
Your eyes could not see 0.17 of a square. The arithmetic sees it at once.
This test does more than comparing gradients. It works for vertical arrows, where a gradient does not exist, and in three dimensions. Most important, it works with letters. If you find that and , you know that PQ is parallel to RS and three times as long, without a single coordinate. The later lecture on proving geometric results with vectors uses exactly this.
Sort the pairs below with this test.
Each card shows two vectors, written as (across, up). Choose a card, then choose its box. Read the reason after each choice.
Each pair of vectors is written as (across, up) and sorted by the test: find k from one component, then check it on the other.
| Pair | Result | Reason |
|---|---|---|
| (2, 3) (6, 9) | Parallel, same direction | k = 3 works for both. |
| (1.5, 1) (3, 2) | Parallel, same direction | k = 2 works for both. |
| (6, −4) (−9, 6) | Parallel, opposite | k = −1.5 works for both. |
| (−1, 2) (3, −6) | Parallel, opposite | k = −3 works for both. |
| (0, 4) (0, −6) | Parallel, opposite | Both point straight up or down; k = −1.5. |
| (2, 3) (4, 7) | Not parallel | The top gives k = 2, but 2 × 3 = 6, not 7. |
| (12, 7) (10, 6) | Not parallel | The top gives k = 5/6, but 5/6 × 7 ≈ 5.83, not 6. |
| (5, 0) (0, 5) | Not parallel | No number turns 5 into 0 and 0 into 5. |
The hardest cards are the ones with a zero, where you must find from the other component, and the near miss, where the same number must work exactly for both.
Unit vectors: a direction with no size
Sometimes you want a direction alone, with no size. For this, use a vector of length exactly 1, called a unit vector.
Scalar multiplication makes one easily. Take any non-zero vector and divide it by its own length. That is the same as multiplying it by the scalar . The direction does not change, because the scalar is positive. The length becomes . The unit vector in the direction of is written , read "a hat":
For example, take . Its length is . So . Check: . ✓
A unit vector lets you build a vector of any length in any direction. A ball rolls at 10 m/s in the direction of . Its velocity is the speed times the unit vector: m/s. Check: . ✓ The speed gives the size, and the unit vector gives the direction.
Worked examples
Are and parallel? If so, describe how compares with .
Think first. If they are parallel, . Find from the top numbers, then test it on the bottom numbers.
Top: , so .
Bottom: . This matches the bottom number of .
So . The vectors are parallel. Because is negative, points the opposite way to . Because , it is one and a half times as long.
Check. and . The ratio is . ✓
. Find (a) the unit vector in the direction of , and (b) the vector of length 26 in the opposite direction.
Think first. Find the length. Each answer is a scalar times .
.
(a) .
(b) Length 26 is twice 13, and the direction is reversed, so the scalar is . The vector is .
Check. (a) , so the length is 1. ✓ (b) . ✓ The lengths are whole because 5, 12, 13 is a Pythagorean triple.
The points are P(1, 2), Q(5, 4), R(7, 8) and S(1, 5). Show that PQRS is a trapezium: exactly one pair of opposite sides is parallel.
Think first. Find the vector along each side with "finish minus start". Then test the two pairs of opposite sides, PQ with SR, and QR with PS.
and .
Top: gives . Bottom: . ✓ So . The sides PQ and SR are parallel, and SR is one and a half times as long.
and . Top: needs . But then the bottom would be 0, not 3. So QR and PS are not parallel.
Exactly one pair of opposite sides is parallel, so PQRS is a trapezium.
Check. is 1.5 times . ✓
OABC is a quadrilateral with , and . The point D is on CB, with . (a) Find and in terms of and . (b) What kind of shape is OABD?
Think first. Use routes along known arrows, then look for multiples.
(a) A to B: go back to O, out to C, then along to B. . O to D: go out to C, then along to D. .
(b) . They are equal vectors, so OD and AB are parallel and the same length. Also, . So OA and DB are parallel and the same length too. Both pairs of opposite sides of OABD are equal and parallel, so OABD is a parallelogram.
Check. says that CB is parallel to OA and twice as long, so OABC itself is a trapezium. Cutting off CD, which matches OA, leaves a parallelogram. ✓
Three traps
It does not. A negative scalar reverses the direction, and its size sets the length. , never . A length is never negative.
Any two vectors with non-zero top numbers have some that matches the tops. That proves nothing. The test is that the same also matches the bottom numbers. and match on top with , but they are not parallel.
Some books describe the test as "divide each component by the matching component and compare". This breaks when a component is 0. For and , the tops give , which has no meaning. Find from a non-zero component, and then check that times the other component gives the other number.
Work each one on paper first. Open a hint only when you are stuck.
-
. Find , and . Then find exactly.
Hint 1
Multiply both components by the scalar. Bracket the negative numbers.
Hint 2
For the length, use , and find first.
Full answer
. . . , so . Check: . ✓
-
(a) Find so that is parallel to . (b) Find so that is parallel to . In each case, say whether the vectors point the same way.
Hint 1
Use the component you know in both vectors to find .
Hint 2
(a) The bottoms give .
Full answer
(a) , so . Then . The vector is , and it points the opposite way, because is negative. (b) , so . Then . The vector is , pointing the same way, half as long. Check (a): . ✓
-
. Find the unit vector in the direction of , and the vector of length 34 that points in the opposite direction to .
Hint 1
Find first. It is a whole number.
Hint 2
34 is twice , and the direction is reversed. What scalar does both?
Full answer
. The unit vector is . The scalar for the second vector is : . Check: . ✓ And . ✓
-
A stretch. A drone flies at 15 m/s through the air, pointing in the direction of , with east as across and north as up. (a) In still air, what is its velocity as a column vector, and where is it after 8 s, measured from its start? (b) A wind now moves the air at m/s. Find the drone's velocity over the ground, its speed over the ground, and where it is after 8 s. Is its path over the ground still parallel to ?
Hint 1
(a) Velocity = speed × unit vector. Displacement = time × velocity, which is another scalar multiple.
Hint 2
(b) Velocity over the ground = velocity through the air + velocity of the air, as in the last lecture's aircraft example.
Full answer
(a) The unit vector is , so the velocity is m/s. After 8 s the displacement is m: 72 m east and 96 m north. Check: m . ✓
(b) Over the ground: m/s. Speed m/s. After 8 s: m. Test against : the tops give , but , not 13. So the path over the ground is not parallel to the way the drone points. The wind has turned its path, as well as changing its speed.
Scalar multiplication is everywhere that a plain number meets a direction. A car's displacement is its velocity times the time taken: a scalar times a vector. In physics, a force on an object equals its mass times its acceleration. Mass is a scalar, so the force and the acceleration are always parallel.
It also explains enlargement. Enlarging by a scale factor turns every side into times itself, so every side of the image is parallel to the matching side of the shape. The next lecture uses the scalar to find the middle of a line, and the lecture after it combines multiples and routes to prove facts about shapes without a single measurement.
- To multiply a vector by a scalar , multiply each of its components by ; is the same as .
- A positive scalar keeps the direction, a negative scalar reverses it, and in both cases.
- The opposite vector is , which is why .
- Two non-zero vectors are parallel exactly when one is a scalar multiple of the other, and the same scalar must work for every component.
- The unit vector has length 1 and the direction of .